Login | Register
产品中心
Home > Products > Aluminum and aluminum alloy casting series auxiliaries > Extrusion solid lubricant

Extrusion solid lubricant

1.Functions:

   It is lightly spread on end face of flat die cavity (without fluid guide hole) to make extruded solid profile separate automatically.

It is spread on end face of extruded shim to make shim separate with discard.

   It is spread on separating shear of discard to reduce shear abrasion and prevent discard from sticking on the shear.

2.Main features: 

1) It can substitute conventional Graphite for lubrication with less fume and clean working table, which will greatly improve the working environment.

2) Good lubrication effect and less consumption.

3) As it is neutral, it will have no corrosion to extruding tool, die and profile.

4) It is convenient for use and storage. It can be used by heating a metal bar up to around 200ºC and inserting it into solid lubricating block until it cooled and solidified.

3.Main technical indexes:

   The PH value is 7 and the lubricating block will melt at the temperature of about 200ºC.It has lubrication property at the temperature of 500ºC.

4.Precautions:

1) It shall not be spread too much but sufficient for separation of profile.

2) It shall not be used on end face of division die and die with fluid guide hole.

5.Packaging and storage:

   It is in block, 25kg for each box ,0.25kg for each block, and shall not contact with water with 2 years for valid period.


<span style="font-size: 16px;"><a href='https://www.huaaochemtech.com/tag/extrusion-solid-lubricant' target='_blank' class='key-tag'><font><strong>Extrusion solid lubricant</strong></font></a> for Aluminum Presses | Huaao</span>

At Jianli Huaao Technology Co., Ltd., we start an extrusion solid lubricant inquiry with the contact point that needs attention. A dummy block release problem, a shear blade issue, and a tooling assembly requirement are different jobs. We review the proposed material against the actual task, equipment, and finished-profile requirements.

Our company combines more than two decades in aluminum profile surface treatment with additive development, production, raw material trading, and technical consulting. That background helps us connect press-side material selection with the cleaning, anodizing, or coating steps that may follow extrusion.

1. Defining the Extrusion Solid Lubricant You Need

We use extrusion solid lubricant to describe a lubricant supplied in a solid form or a product whose lubrication depends on solid ingredients. Those descriptions can overlap, but they are not identical. A stick, a dry powder, and a liquid-carried coating need different purchasing and application information.

For a solid stick or block, the buyer may need dimensions, unit weight, physical consistency, and an approved method of application. For a powder, handling and dispensing requirements may be central. For a coating carried in liquid, the carrier and application equipment also matter.

We confirm the actual product form and composition during quotation. The category name alone does not establish that the material contains graphite, boron nitride, wax, or another ingredient. We do not transfer a formulation claim from a published example to an unconfirmed Huaao offer.

The intended purpose is equally important. Selected extrusion lubricants or parting compounds help manage adhesion and release at designated interfaces. Their usefulness depends on placing an appropriate material at the correct location within the approved press procedure.

We therefore ask which component or contact needs lubrication. Tell us the alloy, relevant surface conditions, operating window, application system, and current problem. If you are replacing an existing product, send its specification and explain which characteristic needs improvement.

A useful specification connects the material with a measurable result. That may be reliable billet-butt separation, controlled application, acceptable residue, or consistent handling. A broad claim such as “high-temperature lubricant” leaves too much open for a purchasing decision.

We also ask whether the inquiry concerns an existing product replacement or a new application point. A replacement may be reviewed against an established specification and approval record. A new location may need a broader equipment and process assessment before the material can be qualified.

We also keep our role clear. Huaao manufactures aluminum surface-treatment additives and trades raw materials. Our company background does not establish that every extrusion lubricant is produced in our own facilities. The offered material, supply basis, and supporting documents are confirmed for the order.

Product-form references: CONDAT, “Graphite sticks and blocks” and “Coatings for billets”; AMCOL, “Solutions for Aluminum Extrusion.” These references describe product categories, not Huaao composition or availability.

2. Choosing the Right Contact Point

Billet and dummy block separation

One established release application is the interface between the billet end and dummy block. The dummy block transfers force from the press stem to the billet. At the end of the cycle, separation from the remaining butt needs to occur within the press's intended sequence.

We discuss the product and application method together. A material applied to a cold billet before heating faces different conditions from a product applied within a hot press cycle. The approved location, surface condition, and equipment must be identified before comparing alternatives.

We also distinguish release from general lubrication. A product may be intended to reduce sticking at one interface without being suitable for every moving component. An effective release film at the dummy block does not establish suitability as a bearing grease or saw lubricant.

Shear blades and selected tooling contacts

Published extrusion lubrication systems include products for shears and selected tooling surfaces. These locations have their own contact conditions and application requirements. We ask buyers to name the component rather than simply describing the whole extrusion press.

Tool condition still matters. Wear, alignment, surface damage, and existing buildup may affect the result. We do not assume a lubricant change will correct an underlying mechanical issue. The trial should assess the material while the equipment remains within its required condition.

Interfaces that need process-specific review

Aluminum extrusion is not a process in which every contact should automatically receive lubricant. Friction at the billet-container interface and die bearing affects metal flow. We review proposed application areas with the customer's technical team and relevant equipment or tooling guidance.

For this reason, we do not recommend coating an entire billet, container, or die bearing simply because a product is described as an extrusion lubricant. Application needs to follow the approved process for the specific press, tooling, alloy, and profile.

Our practical question is straightforward: where should the film remain, and where must transfer be controlled? That helps connect the material's release function with profile quality and the operations following the press.

Technical references: Castool, “Extrusion Lubrication”; Aluminum Extruders Council, “Dummy Block Lubrication Best Practices”; “The role of friction in the extrusion of AA6060 aluminum alloy, process analysis and monitoring”; “Modelling of contact and friction in aluminium extrusion.”

3. Comparing Sticks, Powders, and Carried Coatings

We compare application formats before discussing a replacement. A solid product may suit one handling arrangement, while an automated powder or liquid system suits another. Changing format can also require changes to equipment, controls, cleaning, or material handling.

The table below summarizes published format examples. It is a selection guide, not a performance ranking. It does not establish which forms Huaao currently stocks or which composition will suit a particular extrusion line.

Table 1. Reference comparison of extrusion lubricant formats
FormatPublished category exampleWhat we review with the buyer
Solid stick or blockGraphite-based sticks; boron-nitride-containing wax sticksDimensions, physical consistency, transfer behavior, and approved applicator
Dry powderBoron nitride powder used in billet or dummy block release systemsDispensing compatibility, coverage, dust control, and collection
Liquid-carried solid coatingSolid lubricant dispersed in an aqueous carrierCarrier, preparation requirements, deposition, film formation, and equipment compatibility

Sources: CONDAT, “Graphite sticks and blocks” and “Coatings for billets”; AMCOL, “Solutions for Aluminum Extrusion”; Aluminum Extruders Council, “Dummy Block Lubrication Best Practices.” Buyer-review topics are our selection framework. Published examples are not Huaao product specifications.

The solid ingredient and the supplied physical form are separate facts. A coating containing a solid lubricant may arrive as a liquid dispersion. A solid stick may contain a carrier that changes behavior on a hot surface. We ask for both details when reviewing a product.

We avoid assuming that a familiar ingredient guarantees familiar performance. Formulation, particle condition, carrier, and application system can affect how a film forms and remains at the intended contact. The complete product needs assessment.

We also ask whether the buyer needs a format change or simply a better match within the existing system. If a plant already has qualified dispensing equipment, a replacement should be checked against that equipment before a trial begins.

For a solid-format inquiry, useful information includes the handling method, required size or unit weight, and any concern about breakage or debris. We confirm those details against the actual offer rather than relying on a product photograph.

We also review how the product reaches the application area. A format suitable for one holder or dispensing arrangement may not fit another. Package opening, transfer, and storage between uses should be considered alongside the lubricant's behavior at the contact surface.

Claims such as graphite-free, low-residue, or suitable for a particular temperature range need supporting product information. We discuss them as specific requirements to verify, not properties automatically attached to the phrase extrusion solid lubricant.

4. The Properties We Review Before Recommending a Trial

Service conditions and film behavior

We ask for the conditions at the actual contact surface. Billet temperature, nearby air temperature, and the temperature experienced by the lubricant may differ. A published temperature figure is useful only when the test basis and intended service are understood.

For a stick or block, we may need to review physical consistency and transfer onto the designated surface. For a powder or carried coating, coverage and deposition may be more relevant. The customer's approved application method sets the context for those checks.

We do not use the maximum temperature associated with a raw ingredient as a guarantee for a finished formulation. Carriers, binders, and other constituents may affect the product's usable range and the residue it leaves.

Residue and unwanted transfer

A lubricant should be assessed at its intended location and along any possible transfer path. We ask buyers to identify where residue is acceptable and where it could create a quality or housekeeping concern. Appearance alone cannot answer every contamination question.

When a low-residue extrusion lubricant is requested, define the acceptance method. A clean-looking tool, a lower deposited mass, and an acceptable finished profile are different observations. A useful trial records the result that matters to the plant.

Handling and physical consistency

Package form, unit weight, dimensional variation, breakage, and storage condition may affect usability. If the application system depends on a specific shape or size, include that in the inquiry. A chemically similar product may still be unsuitable for the equipment.

Documents and batch acceptance

We discuss the product specification, COA requirements, and current SDS before an order is agreed. The COA supports the specified quality assessment, while the SDS addresses product hazards and handling. Neither document replaces a trial on the customer's process.

Where a physical or chemical characteristic requires a reported test value, the unit and method should be clear. If the buyer requires independent testing, sampling and acceptance arrangements belong in the quotation discussion.

We also ask customers to identify the specification revision used for approval. A familiar product name on an old order may not capture the current requirements of the press, quality team, or finishing line.

If a material is described as clean or non-staining, we ask what that means for the application. Tool appearance, visible profile marks, and acceptance after finishing are separate checks. Defining the required observation gives the trial a useful target and avoids relying on a description that different teams may interpret differently.

5. Connecting Press Lubrication With Finished-Profile Quality

Our surface-treatment background makes us interested in what happens after extrusion. A profile may be anodized, powder coated, painted, machined, or assembled. We review the lubricant inquiry with those following operations in mind.

If material transfers onto a surface that must later be cleaned or coated, the customer should assess it within the actual pretreatment sequence. We do not assume that all lubricant residue is removed by the same cleaner or under the same conditions.

For anodized profiles, the trial should include the relevant appearance and acceptance requirements after treatment. For powder coating, the buyer may need to assess the established cleaning and coating qualification checks. The finished product requirement determines the evidence needed.

A press-side result can therefore be only part of the decision. Clean separation at the dummy block is useful, but it should be reviewed alongside residue, profile condition, and any downstream effect. We prefer a qualification plan that follows the product through the necessary stages.

We also avoid assigning every profile mark to lubrication. Die condition, alloy, temperature control, tooling alignment, and other process factors may contribute. A material comparison is more meaningful when those conditions are recorded and kept sufficiently consistent.

Extrusion operations serve building profiles, automotive components, machinery, electrical equipment, and other markets. We assess the lubricant against the actual line and customer specification. An industry label does not establish compatibility with every alloy or finish used in that sector.

If your customer restricts an ingredient or requires a particular declaration, send the requirement before quotation. We can review the available information for the offered material. We do not infer a certification or declaration from a general product-category description.

Our aim is to help define a purchasing requirement that the press team and finishing team can both use. That keeps release performance and finished-profile acceptance connected within the same qualification decision.

Where appearance is a customer requirement, the trial should include representative profiles and the relevant finishing route. A short press trial may not cover every alloy, surface finish, or operating condition used by the plant. We ask the buyer to define the range the approval is intended to cover.

6. Measuring a Trial and Comparing Consumption

We start a trial with a clear acceptance question. It might concern release reliability, application consistency, residue, or consumption. A plan that defines the question before the test is easier to interpret than one based only on operator impressions afterward.

We suggest recording the product batch, application location, equipment settings, relevant temperatures, alloy, profile, and observation period. The customer's technical team sets the operating procedure. We focus on making the material comparison and requested evidence clear.

Consumption needs a consistent basis too. Kilograms purchased, grams used per cycle, and kilograms used per accepted tonne describe different things. We compare them carefully so a lower headline quantity does not hide a change in production output.

Table 2. Illustrative consumption calculations for three separate records
Recorded or calculated itemExample AExample BExample C
As-supplied product consumed1.20 kg1.00 kg0.90 kg
Press cycles recorded1,0001,000900
Accepted extrusion output10.0 tonnes8.0 tonnes9.0 tonnes
Product per recorded cycle1.20 g1.00 g1.00 g
Product per accepted tonne0.120 kg0.125 kg0.100 kg

Source: original worked examples prepared for this page. Grams per cycle = product kilograms × 1,000 ÷ recorded cycles. Kilograms per accepted tonne = product kilograms ÷ accepted output tonnes. All inputs are hypothetical; these are not test results, recommended application rates, or product-performance claims. Comparison context: Interlub, “Framework for Comparison and Selection of Aluminum Extrusion Release Agents.”

The examples show why more than one measure can be useful. Example B uses less product per cycle than Example A but more product per accepted tonne. That calculation does not establish the cause of the output difference or prove one material is better.

We also distinguish product consumed from product reaching the intended contact. Breakage, overspray, handling loss, and unused material may affect purchasing cost where relevant. The trial should define what is included in the recorded consumption.

Comparisons between different formulations need additional care. Equal as-supplied masses do not necessarily contain equal solid content or provide equivalent coverage. The complete product and application system must be assessed together.

A useful cost review can include material, labor, cleanup, equipment maintenance, interruptions, and accepted output. We recommend using the customer's records rather than claiming a universal percentage saving or tool-life improvement.

Startup, steady production, and restarts can also produce different observations. We suggest identifying which parts of the production period are included in the trial record. An isolated successful cycle may be encouraging, but repeatability across the agreed conditions gives the buyer a stronger basis for continuing supply.

These examples explain measurement and purchasing comparisons. They are not instructions for applying lubricant to an extrusion press.

7. Working With Huaao: Supply, Packaging, and Documents

We have spent more than two decades in the aluminum profile surface-treatment industry. Our company combines research, additive production, raw material trading, and technical consulting. That experience helps us understand why a press consumable needs to be assessed within a wider manufacturing sequence.

We are located in the Huazhong Ecological Aluminum Demonstration Industrial Park in Jianli, Hubei. Huaao Technology serves as a standing council member of the China Non-Ferrous Metals Processing Industry Association. Our facilities, testing instruments, and quality assurance system support our additive business.

Our product development experience includes chemical sandblasting agents, alkaline etching agents, degreasing and de-waxing agents, coloring stabilizers, sealing agents, and chromium-free passivation agents. We use that process awareness when discussing surface cleanliness and the requirements following extrusion.

For extrusion solid lubricant supply, we keep claims tied to the offered product and available evidence. Composition, dimensions, service conditions, physical characteristics, and any required declarations need confirmation in the quotation and specification.

Packaging may involve suitable bags, cartons, drums, or other arrangements appropriate to the actual form. We review protection against contamination, moisture, damage, or unsuitable storage conditions as required by the product. A liquid IBC is not a default package for a solid stick or block.

Storage conditions and any stated shelf life must come from the offered product information. We do not assign one storage period to all extrusion lubricant formulations. If the plant uses small quantities over time, tell us so package size and handling after opening can be considered during quotation.

The current SDS and site risk assessment should guide handling. Hot tooling, press movement, dust, fumes, or carriers may require controls depending on the product and process. Application must follow the approved procedure, including machine guarding and safe access requirements.

We confirm production or stocking time according to the product type, specification, inventory, and order quantity. Sea or road transport may be considered where appropriate; air shipment depends on classification, restrictions, and carrier acceptance. Dangerous-goods requirements apply where relevant to the actual shipment.

Delivery follows the contract's agreed technical indicators, quantity, packaging, and document requirements. COA, SDS, and additional paperwork can be discussed during quotation. Payment may be negotiated through T/T or a letter of credit, with the delivery basis and included charges clearly stated.

8. Extrusion Solid Lubricant FAQ

Does extrusion solid lubricant always contain graphite?

No. Published product categories include different solid ingredients and physical forms. We confirm the composition of the actual offer. The product name alone does not establish graphite content, boron nitride content, or a particular carrier.

Is a solid lubricant the same as a dry powder?

Not necessarily. We distinguish the supplied form from the ingredients responsible for lubrication. A solid stick, a dry powder, and a liquid-carried solid coating can require different equipment and handling arrangements.

Can one product lubricate the entire extrusion press?

We would not make that assumption. Release interfaces, shears, bearings, saws, and die contacts have different requirements. Identify the intended application point and follow the approved press and tooling guidance before selecting or changing a lubricant.

Can you confirm a maximum working temperature?

We review the actual formulation, service conditions, and supporting product information. A raw ingredient's temperature capability does not automatically establish the finished product's usable range. Please include the conditions at the intended contact in your inquiry.

Will the product affect anodizing or powder coating?

We assess that through the customer's relevant cleaning and finishing qualification. Residue transfer, pretreatment, and final acceptance requirements matter. We do not assume compatibility with every finishing process from a product-category description alone.

How should we compare consumption?

We suggest recording a clear material-consumption boundary and relating it to cycles and accepted output where useful. Compare similar operating conditions and consider the complete formulation. A lower quantity per cycle does not automatically establish a lower total cost.

What information do you need for a quotation?

Send the application point, alloy, relevant temperatures, equipment, required form, specification, quantity, packaging preference, and destination. Include residue restrictions, document requirements, and the result you want to assess in a qualification trial.

What delivery and payment terms are available?

We confirm availability, schedule, packaging, transport, and required documents for the specific offer. T/T or a letter of credit may be negotiated. The quotation and contract establish the agreed technical and commercial requirements for the order.

ONLINE MESSAGE

Please fill in a valid email address
Captcha Can not be empty

RELATED PRODUCTS

No search results found!
chat

Online Customer Service

×

This website uses cookies to ensure you get the best experience on our website.

Accept Reject