Login | Register
产品中心
Home > Products > Aluminum and aluminum alloy Surface handle series > Medium temperature sealant (solid)

Medium temperature sealant (solid)

1.Product features:

This product is light green solid. The product applies to aluminum and aluminum alloy anode oxide film processing, especially suitable for sealing after dyeing the oxide film, the sealing is enough that no making frost, corrosion resistance is higher than boiling water sealing, prevent fade or discoloration. PH value of bath is stability, easy maintenance, long life and low consumption.Light green solid powder, with acetic acid smell.


2.Operating conditions: 

Code:     Range
HA—02A  4.5-5 g / L
Temperature 53-58 ℃
PH  5.7-6.0
Time 1-1.2 um / min


3.Packing and storage: 

The products are packed with 20kg cartons, lined with single layer or double layer plastic bags. During storage and transportation, it shall be resistant to moisture.



Medium temperature sealant for aluminum anodizing: Product Guide, Applications, and Supplier Selection

When aluminum profiles come out of an anodizing line, the work is not quite finished. The anodic oxide layer needs to be sealed to help close its pores and improve the finished surface's resistance to corrosion and staining. Choosing the right sealing process is an important part of producing aluminum components that look good and perform reliably over time.

At Jianli Huaao Technology Co., Ltd., we focus on chemical additives for aluminum profile surface treatment. Our work covers product development, production, technical consulting, and the supply of chemicals used in different stages of aluminum finishing. With more than 20 years of industry experience, we understand that a sealing agent is not simply another chemical added to a tank. It must fit the anodizing process, the aluminum alloy, the required finish, and the production team's daily operating conditions.

Our medium temperature sealant is intended for aluminum anodizing applications that use a medium-temperature sealing process. The exact operating temperature, bath concentration, treatment time, pH range, and compatibility requirements should be confirmed against the product's current technical data sheet (TDS) and safety data sheet (SDS). These values can differ between formulations, so we do not recommend relying on a general figure without checking the specific product.

In this guide, we explain what medium temperature sealing does, how to assess a sealing agent, which production factors matter most, and how to choose a supplier for Aluminum surface treatment chemicals. We also share practical checks that can help manufacturers compare products and make a more informed purchasing decision.

1. What Is Medium Temperature Sealant for Aluminum Anodizing?

A medium temperature sealant is a chemical product used in the sealing stage of certain aluminum anodizing processes. Anodizing creates a controlled oxide layer on the surface of aluminum. This layer can improve corrosion resistance and provide a suitable base for decorative finishes, but the oxide coating contains very small pores. These pores are a normal result of the anodizing process.

Sealing helps reduce the open structure of the anodic coating. Depending on the sealing chemistry and process conditions, the treatment changes the pore structure and helps the coating resist the entry of contaminants. This is particularly important when aluminum profiles will be exposed to moisture, handling, cleaning, or outdoor service.

The term medium temperature sealant describes a product category rather than one universal chemical formula. Different suppliers may use different chemistries, and their recommended operating conditions may not be the same. For this reason, buyers should check the product documentation rather than assume that all medium-temperature sealing agents can be used in the same bath or at the same temperature.

How does sealing fit into an anodizing line?

A typical aluminum anodizing line includes several stages. The exact sequence depends on the required appearance and the factory's process design, but a simplified route may look like this:

  1. surface preparation: The aluminum profile is cleaned to remove oil, dirt, and other surface contamination.

  2. Etching or other pretreatment: The surface is adjusted to achieve the required appearance and prepare it for anodizing.

  3. Anodizing: An electrochemical process forms an oxide coating on the aluminum.

  4. Coloring, if required: The coating may receive an electrolytic or other compatible coloring treatment.

  5. Rinsing: The profile is rinsed according to the production process to control chemical carryover.

  6. Sealing: The anodic coating is treated using a suitable sealing process.

  7. Final inspection: The finished material is checked against the agreed appearance and performance requirements.

The sealing stage cannot correct every problem created earlier in the line. Poor cleaning, uneven anodizing, excessive coating variation, or an unsuitable coloring process may still affect the final result. We therefore recommend evaluating the sealing agent as part of the complete surface treatment process instead of treating it as an isolated purchase.

Who may need this product?

Medium temperature sealing agents may be relevant to aluminum extrusion plants, anodizing service providers, architectural aluminum finishers, and manufacturers that process aluminum parts in-house. They may also be considered by distributors and chemical suppliers serving these industries.

Before placing an order, buyers should confirm whether the product is suitable for their alloy, anodizing process, coloring method, and required coating performance. If the application involves a tightly controlled architectural specification, electronic component, or other demanding end use, the process should be validated against the applicable customer requirements and test methods.

2. How Medium Temperature Sealing Works

To understand the role of a medium temperature sealing agent, it helps to look at the structure of an anodic oxide coating. During anodizing, the aluminum surface develops an oxide layer with a network of fine pores. These pores are useful during some coloring processes, but an unsealed coating may be more vulnerable to staining or corrosion under certain conditions.

Sealing changes the pore structure and helps reduce the coating's permeability. The precise mechanism depends on the sealing chemistry. Some processes rely on hydration-related changes in the oxide, while other formulations use different chemical approaches. The correct explanation for a particular product should be based on its formulation and technical documentation, not on assumptions about the entire product category.

The importance of temperature and treatment time

Temperature and treatment time work together. A bath that is too cool for the selected formulation may not deliver the intended sealing result within the planned cycle. A bath that is too hot, or a treatment that runs too long, may increase operating costs or affect the appearance of some finishes. These outcomes depend on the product and the process, so there is no single temperature or time setting that applies to every medium temperature sealant.

For production use, we recommend following the supplier's written operating range and establishing a controlled process window. Operators should measure bath temperature with a suitable instrument, record treatment time, and check the bath condition according to the product instructions. If the line uses automatic controls, the temperature sensor and timer should be checked as part of routine maintenance.

Bath chemistry matters as much as temperature

Temperature is only one part of the process. Depending on the formulation, concentration, pH, water quality, dissolved aluminum, and contamination from previous stages may influence bath performance. Rinsing practices and the condition of the anodic coating can also affect the finished result.

We suggest keeping a simple process record that includes the product batch, bath make-up details, operating temperature, treatment time, and inspection results. This record makes it easier to identify a change in quality and determine whether the cause is related to the sealing bath or an earlier process step.

Why rinsing and handling should not be overlooked

Rinsing between process stages helps limit unwanted chemical carryover. The appropriate rinse sequence depends on the line design and the instructions for the chemicals being used. After sealing, the way profiles are drained, dried, handled, and stored can also affect the appearance of the final product.

For example, water marks, handling stains, and scratches may be mistaken for sealing defects. A useful troubleshooting process checks the entire line, including cleaning, anodizing, coloring, rinsing, sealing, and post-treatment handling. This approach is more reliable than changing the sealing chemical immediately whenever a surface problem appears.

In short, a suitable medium temperature sealant is one part of a controlled finishing system. Good results depend on matching the chemical product to the process and keeping the main operating conditions within the supplier's recommended range.

3. Main Features and Practical Benefits

When buyers compare medium temperature sealants, we recommend looking beyond the product name. A useful assessment should cover process compatibility, documentation, operating requirements, quality control, and the support available from the supplier. The following points can help purchasing teams and production engineers organize that assessment.

Compatibility with the existing anodizing process

A sealing agent should be suitable for the type of anodic coating and the process conditions used at the factory. If the line includes electrolytic coloring, organic coloring, or another finishing step, compatibility should be checked before changing the sealing chemistry. The same applies when a factory processes different aluminum alloys or product shapes on one line.

We recommend testing a candidate product on representative parts rather than making a full production change based only on a supplier quotation. The test should use the actual alloy, coating thickness, color, and production conditions as far as practical. This gives the team a more useful basis for deciding whether the product meets its needs.

Operating control and production planning

A product with clear operating instructions is easier to evaluate and manage. Buyers should ask for the recommended temperature range, concentration, pH limits where applicable, treatment time, bath maintenance guidance, and replenishment instructions. They should also confirm which measurements operators need to record during normal production.

Clear documentation helps reduce uncertainty when a new product is introduced. It also makes operator training and shift-to-shift consistency easier. These are practical benefits for plants that need repeatable results across many batches of aluminum profiles.

Quality checks that support reliable output

The right inspection plan depends on the finished product's intended use. Visual inspection may be enough for an initial process check, but demanding applications may require additional tests. Possible checks include coating thickness, appearance, color consistency, and an appropriate sealing-quality or corrosion-related test selected from the relevant customer specification or industry standard.

We advise customers to define acceptance criteria before conducting a trial. Without agreed criteria, two parties may interpret the same test result differently. For example, a decorative profile and an aluminum component intended for a more demanding service environment may require different inspection plans.

Technical support and clear product information

Technical support is especially useful when a plant changes from one sealing product to another. A supplier should be able to explain the intended application, provide current safety and technical documentation, and help identify which operating variables need attention during a trial.

At Huaao Technology, we work in the aluminum surface treatment chemical sector and provide technical consulting as part of our business. We encourage buyers to share the actual process requirements with us so that product suitability can be reviewed on a practical basis. Where information is not available, we prefer to confirm it rather than promise a result that has not been verified.

Comparison table 1: Questions to ask when selecting a sealant

The table below is a purchasing checklist, not a claim that every product has the same specification. It shows the information buyers should request before comparing quotations.

Evaluation itemWhat to confirmWhy it matters
Recommended temperatureThe supplier's stated operating rangeHelps confirm that the product fits the available process controls.
Bath concentrationInitial make-up and replenishment instructionsSupports consistent bath preparation and maintenance.
Treatment timeRecommended range for the intended coating and processHelps production teams plan the cycle and assess throughput.
Bath monitoringRequired checks, including pH or other parameters where applicableMakes routine process control more systematic.
Finish compatibilitySuitability for the alloy, color, coating, and required appearanceReduces the risk of introducing an unsuitable chemical into the line.
Quality verificationApplicable test methods and acceptance criteriaProvides a clear basis for approving a production trial.
Safety documentationCurrent SDS, handling instructions, and storage requirementsHelps the factory manage chemical handling and workplace safety.

Source: This table is an original buyer checklist prepared from general aluminum anodizing process considerations. It is not copied from a third-party specification. The actual requirements must be confirmed with the product supplier, the current TDS and SDS, and the applicable customer or industry standard.

4. Applications Across Aluminum Manufacturing Industries

Aluminum is widely used because it combines relatively low weight with useful mechanical properties and a surface that can be finished in many ways. Anodizing can provide a protective oxide coating and support a range of decorative appearances. A medium temperature sealing agent may be considered wherever the selected anodizing line uses a compatible medium-temperature sealing process.

Architectural aluminum and building materials

Architectural profiles are used in windows, doors, curtain walls, railings, partitions, and other building systems. Their surfaces may need to maintain a consistent appearance while facing handling, cleaning, humidity, and outdoor exposure. In these applications, sealing is one part of a wider quality system that includes alloy selection, pretreatment, anodizing, coloring, and inspection.

For architectural projects, buyers should identify the applicable project specification and acceptance criteria before selecting a sealant. A product name alone does not prove that the finished coating meets a particular building standard. Testing and documentation should match the requirements of the project and the relevant market.

Electronics and electrical equipment

Aluminum is used in equipment housings, frames, heat sinks, and other components. Depending on the design, anodizing may be selected for appearance, surface protection, or a combination of functional and decorative reasons. The sealing product must be compatible with the required coating and the component's operating environment.

Where dimensional control or specific electrical properties matter, the manufacturer should evaluate the complete anodized part rather than relying on the sealant description. Part geometry, coating thickness, masking, and the intended assembly may all influence the final specification.

Automotive and transportation components

Aluminum components are used in vehicle trim, structural parts, housings, and various supporting systems. Different components have different service conditions, so their surface treatment requirements can vary significantly. A medium temperature sealing agent may be suitable for some anodized components, but compatibility and performance should be demonstrated against the applicable drawing and test requirements.

For parts exposed to road salts, moisture, cleaning chemicals, or frequent temperature changes, corrosion-related testing may be especially relevant. The correct test method and acceptance level should come from the customer's specification or a recognized standard for that application.

Machinery, consumer products, and general industrial parts

Machinery frames, instrument housings, furniture fittings, appliance components, and decorative aluminum parts may also use anodized finishes. Some products prioritize a uniform color, while others place greater emphasis on wear, corrosion resistance, or easy maintenance.

When a factory produces many different parts, it should check whether one sealing product can cover all the required applications. A chemical that works well for one alloy or finish should not automatically be assumed suitable for every product on the line.

Comparison table 2: Matching application needs with quality checks

This table provides general guidance for planning a product trial. It does not replace the test plan or acceptance limits specified by the end customer.

ApplicationCommon surface prioritiesChecks to consider
Architectural profilesConsistent appearance and suitable environmental resistanceVisual inspection, coating thickness, and specified sealing or corrosion tests
Electronic housingsAppearance, dimensional fit, and application-specific surface propertiesAppearance, dimensions, coating thickness, and customer-defined functional checks
Automotive componentsConsistency and performance under the intended service conditionsDrawing review and application-specific durability or corrosion testing
Machinery partsSurface protection and suitability for the working environmentVisual inspection, coating thickness, and relevant performance tests
Decorative consumer productsColor uniformity and a clean finished appearanceColor comparison, surface inspection, and any specified sealing-quality test

Source: Original application-planning guidance based on common aluminum finishing considerations. The table does not represent measured performance data or a formal industry standard. For project approval, consult the customer's specification and the test methods it identifies.

5. How We Approach Product Quality and Manufacturing

At Jianli Huaao Technology Co., Ltd., we work with chemical additives for aluminum profile surface treatment. Our business includes research and development, production, sales, technical consulting, and trading of electroplating and magnetic raw materials. We have served the aluminum surface treatment industry for more than two decades, and our product range covers several stages of aluminum finishing.

Our location in the Huazhong Ecological Aluminum Demonstration Industrial Park in Jianli, Hubei, places us in a region with a strong connection to aluminum manufacturing. We also serve as a standing council member of the China Non-Ferrous Metals Processing Industry Association. These details describe our industry background; they should not be interpreted as a substitute for product-specific testing or certification.

Product development based on process needs

Surface treatment chemicals need to work within real production conditions. When developing or evaluating a product, the relevant questions include the target process, the required finish, the operating conditions, and the quality checks used by the customer. These factors help define the information needed for a meaningful product assessment.

Our wider product portfolio includes chemical sandblasting agents for aluminum alloys, mirror polishing agents, alkaline etching agents, electrolytic coloring stabilizers, sealing agents for different temperature ranges, acid etching sand surface agents, neutralization brightening agents, degreasing and dewaxing agents, and chromium-free passivation agents.

This range allows us to understand how different chemical stages relate to one another. However, chemicals designed for separate process stages are not interchangeable. A sealing agent should be selected for the sealing step, while pretreatment, etching, coloring, and passivation products must be selected for their own intended functions.

Production equipment and quality assurance

We have production facilities, testing instruments, and a quality assurance system to support our work in surface treatment chemicals. For each order, buyers should confirm which inspection records, batch information, and product documents are available and what will be supplied with the shipment.

For a medium temperature sealant, the most useful technical information normally includes the product identification, intended application, recommended operating conditions, bath maintenance guidance, safety precautions, and storage requirements. Where applicable, customers should also request the current TDS and SDS and clarify the test methods used to evaluate the finished coating.

We believe clear product information is more useful than broad promises. If a buyer has a particular anodizing line, alloy, color requirement, or acceptance standard, sharing those details early helps both sides determine whether a trial is appropriate.

Practical production and delivery arrangements

Our usual production lead time is approximately 3–10 working days, depending on the product, order quantity, material availability, and production requirements. The confirmed lead time should be agreed for each order rather than assumed from this general range.

Before delivery, inspection and documentation can be arranged according to the agreement between the buyer and our company. Payment terms are negotiable and may include advance payment or other mutually agreed arrangements. The available terms should be confirmed in the quotation or sales contract.

Transportation can be arranged through express delivery, logistics services, or dedicated vehicles, depending on the shipment size and destination. Packaging is selected according to the product and transport requirements and may include suitable protective materials, cartons, or wooden cases. For chemical products, packaging, labeling, and transport arrangements must also comply with the applicable safety and shipping rules.

Comparison table 3: Information to confirm before ordering

For industrial buyers, the following checklist helps reduce misunderstandings between purchasing, production, quality, and logistics teams.

Order stageInformation to confirmRecommended record
Technical reviewIntended use, process conditions, and compatibility requirementsWritten technical confirmation and applicable TDS
Safety reviewHandling, storage, personal protection, and transport requirementsCurrent SDS and relevant safety instructions
Trial and approvalTest parts, evaluation method, and acceptance criteriaTrial record and agreed inspection results
Commercial confirmationQuantity, price, lead time, payment, and delivery termsQuotation and confirmed purchase order
ShipmentPackaging, labeling, shipping method, and required documentsShipping and inspection records as agreed

Source: Original B2B purchasing checklist prepared for this product page from common industrial procurement and chemical-handling practices. The specific documents and requirements should be agreed by the buyer and supplier and must comply with applicable regulations.

6. How to Choose a Medium Temperature Sealant Supplier

Price is important, but it should not be the only factor when selecting an aluminum anodizing sealing agent. A low purchase price may not represent the best overall value if the product is difficult to control, lacks clear documentation, or requires extensive production adjustments. On the other hand, a higher-priced product is not automatically better. The decision should be based on the requirements of the process and the total cost of achieving acceptable finished parts.

Ask for product-specific documentation

Start by requesting the current TDS and SDS. The TDS should identify the intended application and the supplier's recommended operating conditions. The SDS should provide relevant information on hazards, safe handling, storage, emergency measures, and other required safety topics.

Check whether the product name, grade, packaging, and documentation refer to the same item being quoted. If a supplier provides only a general description without a clear product identity, ask for clarification before placing an order.

Compare the complete process cost

The total cost of using a sealing agent can include more than the purchase price per kilogram. Depending on the formulation and factory process, buyers may need to consider product consumption, bath make-up, replenishment, monitoring, treatment time, waste handling, and the cost of rejected or reworked parts.

To compare suppliers fairly, use the same evaluation basis for each candidate. For example, record the chemical quantity used, bath operating conditions, production output, inspection results, and any process changes required during the trial. Do not assume that a product has a lower operating cost simply because its quoted unit price is lower.

Run a controlled trial before full conversion

A production trial is often the most practical way to assess a new medium temperature sealant. Before the trial begins, agree on the sample parts, line conditions, evaluation methods, and acceptance criteria. Keep the other process variables as consistent as possible so that the results can be compared meaningfully.

Where a factory is switching from an existing product, the trial plan should also address bath preparation, cleaning of equipment if required, compatibility with residues from the previous chemistry, and operator training. These steps should follow the instructions of the chemical suppliers and the factory's own safety procedures.

Check the supplier's ability to support repeat orders

Industrial buyers usually need a reliable supply arrangement, not just one successful sample. Ask about normal lead time, packaging options, batch identification, available quality records, and how changes to product specifications will be communicated. If your process requires a particular grade or approval procedure, document it before repeat orders begin.

At Huaao Technology, we encourage buyers to discuss their actual application and purchasing requirements with us. Our experience in aluminum surface treatment chemicals helps us understand the questions that production and purchasing teams need to resolve. Product suitability, however, must still be established using the relevant technical information and agreed verification process.

What information should buyers send us?

To help us assess a request for medium temperature sealant, buyers can provide the following details:

  • The aluminum alloy or profile type being processed.

  • The anodizing and coloring processes currently in use.

  • The existing sealing method, if one is already used.

  • The required finish, color, coating thickness, and relevant quality standard.

  • The available bath temperature range and production cycle requirements.

  • The estimated monthly consumption or order quantity.

  • The destination country and any applicable chemical documentation requirements.

These details help us understand the application before discussing product selection, trial arrangements, pricing, and delivery. If some information is not available, buyers can start with the details they have and confirm the remaining points during the technical review.

7. Frequently Asked Questions About Medium Temperature Sealant

What is medium temperature sealant used for?

It is used in compatible aluminum anodizing processes to seal the porous anodic oxide coating. Sealing helps reduce the open pore structure and supports the required surface protection and appearance. The exact benefits depend on the sealing chemistry, anodizing conditions, and performance requirements of the finished part.

What is the correct operating temperature?

There is no single temperature that applies to every medium temperature sealant. The correct operating range depends on the specific formulation. Please consult the product's current TDS and follow the supplier's instructions. Do not select a temperature solely because another product is described as a medium temperature sealant.

How long should aluminum profiles remain in the sealing bath?

The treatment time depends on the product, coating characteristics, bath conditions, and required result. Follow the recommended time range in the TDS and verify the process using the agreed inspection method. A time setting copied from another product may not provide equivalent results.

Can one sealing agent be used for every aluminum alloy?

Not automatically. Alloy composition, pretreatment, anodizing conditions, coloring, and the intended use of the component can affect the finishing process. Confirm compatibility with the supplier and test representative parts before using the product across different alloys or product lines.

Can medium temperature sealant be used after electrolytic coloring?

That depends on the sealing formulation and the coloring process. Some combinations may be suitable, while others require specific operating conditions or a different product. Confirm compatibility with both the sealing chemical supplier and the process specification before changing production.

How can a factory check sealing quality?

The appropriate method depends on the finished product and its specification. Visual inspection can identify some surface issues, but it does not prove that all sealing requirements have been met. Depending on the application, the inspection plan may include a recognized sealing-quality test, corrosion testing, coating thickness measurement, color assessment, or other customer-defined checks.

Use the test method and acceptance limits stated in the applicable specification. If no method has been agreed, establish one with the customer and technical team before approving a product trial.

What should we do if stains or color changes appear after sealing?

Do not assume that the sealing agent is the only possible cause. Review the cleaning and rinsing stages, anodizing and coloring conditions, bath temperature, treatment time, water quality, handling, and drying. Compare affected parts with parts produced under known acceptable conditions. Record the findings before changing the chemical or making several process adjustments at once.

What documents should we request before buying?

At a minimum, request the current TDS and SDS and confirm the product identity, packaging, recommended operating conditions, storage requirements, and handling instructions. Depending on your purchasing agreement, you may also request batch information, inspection records, or other documentation relevant to the order.

What is your usual production lead time?

Our general production lead time is 3–10 working days, depending on the product, order quantity, and production requirements. The actual lead time should be confirmed in the quotation or order confirmation. Shipping time is separate and depends on the destination, transport method, and applicable shipping requirements.

Can you support bulk orders and long-term supply?

We handle industrial chemical business and can discuss order quantities, packaging, delivery arrangements, and repeat-order requirements with customers. The suitable supply plan depends on the specific product, demand forecast, destination, and agreed commercial terms. Please contact us with your expected consumption and delivery schedule so that we can review the requirements.

How should medium temperature sealant be stored?

Follow the storage conditions in the product's SDS and TDS. The appropriate conditions can vary by formulation and packaging. Keep containers correctly identified, closed as instructed, and stored in a suitable area. Follow local chemical safety rules and do not transfer the product into an unmarked container.

Conclusion: Choose a Sealing Agent That Fits Your Process

A suitable medium temperature sealant can play an important role in producing consistent anodized aluminum profiles. The best choice depends on more than the product name. Buyers should consider the actual operating temperature, bath control requirements, compatibility with the anodizing and coloring process, inspection criteria, safety documentation, and the supplier's ability to support the order.

At Jianli Huaao Technology Co., Ltd., we specialize in chemical additives for aluminum profile surface treatment and bring more than 20 years of industry experience to our work. Our product range covers several important stages of aluminum finishing, including pretreatment chemicals, etching agents, electrolytic coloring stabilizers, and sealing agents for different temperature ranges.

If you are looking for a medium temperature sealant for aluminum anodizing, we invite you to share your process conditions, required finish, expected order quantity, and applicable quality requirements. We can then review the available product information and discuss a suitable next step, including documentation, trial evaluation, quotation, and delivery arrangements.

Contact Jianli Huaao Technology Co., Ltd. to discuss your aluminum surface treatment chemical requirements. For an accurate product recommendation, please confirm the formulation-specific operating conditions and performance requirements before making a production change.

ONLINE MESSAGE

Please fill in a valid email address
Captcha Can not be empty

RELATED PRODUCTS

chat

Online Customer Service

×

This website uses cookies to ensure you get the best experience on our website.

Accept Reject