At Jianli Huaao Technology Co., Ltd., we specialize in chemical additives for aluminum profile surface treatment. With more than 20 years of industry experience, we understand that manufacturers need reliable chemicals, consistent surface quality, and practical technical support to keep their production lines running smoothly.
Our Acidic Sand Finishing Agent is intended for compatible aluminum and aluminum alloy surface treatment processes where a sand-like surface texture is required. It is designed for manufacturers who want to evaluate an acid-based finishing solution as part of their existing aluminum pretreatment or decorative finishing process.
Aluminum surface finishing is not just about making a product look good. The surface condition can affect the final appearance, the consistency of later treatments, and the overall quality of the finished component. A suitable finishing process can help manufacturers achieve the surface style required for architectural profiles, electronic equipment, industrial components, and other aluminum products.
At Huaao Technology, we know that different customers have different requirements. Some need a uniform matte appearance, while others want a particular sand-like texture before anodizing or another finishing step. Alloy grade, previous surface preparation, bath conditions, and the required final appearance all influence product selection.
We work with customers to understand these requirements and identify the technical information needed to assess product suitability. Our goal is to help aluminum manufacturers make informed decisions based on their actual production conditions rather than relying on general product descriptions alone.
Product name: Acidic Sand Finishing Agent
Product category: Aluminum surface treatment chemicals
Intended application: Compatible aluminum and aluminum alloy surface finishing processes
Supplier: Jianli Huaao Technology Co., Ltd.
Technical support: Product selection and process evaluation assistance
1. What Is an Acidic Sand Finishing Agent?
An Acidic Sand Finishing Agent is a chemical product intended for suitable aluminum surface treatment processes that aim to create a sand-like or matte surface appearance. In aluminum finishing, this type of surface effect may be used to reduce an overly glossy appearance and create a more uniform decorative finish.
Aluminum profiles can have different surface conditions after extrusion, machining, storage, and handling. Depending on the required result, manufacturers may use mechanical methods, chemical treatment, or a combination of processes to prepare the surface before applying the final finish.
An acid-based sand finishing process uses a compatible chemical treatment to change the condition of the aluminum surface. The exact effect depends on the product formulation, the alloy, the initial surface condition, and the operating conditions. The term "acidic" describes the general chemical character of the product, while "sand finishing" refers to the intended surface appearance.
It is important to understand that a chemical sand finish is not automatically identical to a finish produced by abrasive blasting. Mechanical sandblasting uses abrasive particles to change the surface texture, while chemical finishing relies on the action of a treatment solution. The appearance produced by the two methods may differ, even when both are described as sand-like or matte.
For this reason, we recommend confirming the required finish with sample parts, reference images, or an approved surface sample before selecting a treatment method. A clear reference makes it easier for the manufacturer and customer to agree on the expected result.
Why Do Aluminum Manufacturers Use Sand Finishing?
A matte or sand-like finish can provide a different visual effect from a smooth, highly reflective aluminum surface. It may be selected for decorative profiles, equipment housings, panels, and other products where appearance is an important part of the design.
Surface finishing can also prepare aluminum for later treatment. For example, some production lines use a chemical finishing stage before anodizing. However, the exact sequence depends on the alloy, the treatment chemistry, and the required final coating. Not every sand finishing agent is suitable for every anodizing line.
When choosing an Acidic Sand Finishing Agent, manufacturers should consider more than the product name. The main questions include:
Is the product suitable for the aluminum alloy being processed?
Can it produce the desired matte or sand-like appearance?
Is it compatible with the existing pretreatment and finishing sequence?
What operating limits and bath maintenance instructions apply?
Will the treated surface meet the customer's appearance and quality standards?
What safety measures and technical documents are required?
At Jianli Huaao Technology Co., Ltd., we encourage customers to evaluate these points before introducing a new chemical into production. This approach helps reduce avoidable trial costs and supports better communication between chemical suppliers, surface treatment plants, and end customers.
2. How Does an Acidic Sand Finishing Agent Work?
The working principle of an acid-based aluminum finishing treatment depends on its specific formulation. In general, a suitable chemical solution interacts with the aluminum surface and changes its surface condition. The resulting appearance may be more matte or textured than the original surface.
We do not assume that all acidic finishing agents use the same reaction mechanism. Different formulations may behave differently, and their performance can depend on alloy composition, bath condition, temperature, treatment time, and other process variables. The product's technical data should therefore be used to confirm its intended operating method.
Step 1: Inspect the Incoming Aluminum
Before treatment, the production team should inspect the aluminum profiles or parts. Common points to review include oil contamination, scratches, extrusion marks, stains, and differences between material batches.
These defects may remain visible after chemical treatment. A finishing agent cannot be expected to remove every mechanical defect or correct every difference in the incoming material. Identifying surface problems early helps prevent unnecessary chemical consumption and rejected parts.
Step 2: Prepare the Surface
Depending on the production line, the preparation stage may include degreasing, rinsing, or another approved pretreatment operation. The purpose is to make the incoming surface suitable for the next step.
Proper pretreatment is important because oil, dust, and other residues can cause uneven chemical contact. If different areas of a profile enter the finishing bath with different surface conditions, the final appearance may also vary.
Step 3: Apply the Chemical Treatment
The aluminum is treated according to the product-specific operating instructions. The relevant conditions may include solution concentration, temperature, treatment time, bath movement, and the loading arrangement.
The exact values must come from the current technical documentation for the selected product. We do not recommend using a generic acid concentration, treatment time, or temperature in place of confirmed product instructions.
During production, the operator should follow the approved procedure and monitor the process variables that are relevant to the bath. Changing several variables at once makes it harder to identify the cause of a surface defect or an unexpected appearance.
Step 4: Rinse and Continue the Finishing Process
After treatment, rinsing is normally carried out according to the approved process. The purpose is to remove residual process solution and reduce unwanted carryover into the next tank.
Depending on the finished product, later steps may include anodizing, coloring, sealing, or another compatible surface treatment. The treated surface should be checked before moving to the next stage, especially when appearance consistency is important.
Step 5: Inspect the Finished Surface
Visual inspection can help identify uneven texture, stains, streaks, or other visible defects. Where required, the production team should also check the relevant coating properties after subsequent treatment.
For decorative products, an approved sample or color and appearance standard is useful for comparison. Lighting, viewing angle, surface cleanliness, and sample preparation should be kept consistent during inspection.
Table 1. Main Process Stages and Quality Checks
| Process stage | Main purpose | Recommended checks |
|---|---|---|
| Incoming material inspection | Identify defects before treatment | Alloy information, oil, scratches, stains, and visible surface differences |
| Surface preparation | Prepare the aluminum for chemical treatment | Cleaning effectiveness, rinse condition, and consistency between parts |
| Acidic sand finishing | Produce the intended surface appearance | Bath condition, temperature, treatment time, and visual uniformity |
| Rinsing | Remove process residues according to the approved procedure | Rinse condition, carryover, and visible residues |
| Subsequent treatment | Complete the specified surface finishing sequence | Compatibility with anodizing, coloring, sealing, or other approved steps |
| Final inspection | Confirm the finished product meets requirements | Appearance, agreed surface sample, and applicable coating tests |
Table 1 source note: This table is a general process checklist prepared for this page, not a product test report. The actual process sequence and operating parameters should follow the product's technical documentation and the customer's approved production procedure. For general anodizing information, see the Aluminum Anodizers Council.
3. Key Features and Practical Benefits
When selecting an Acidic Sand Finishing Agent, manufacturers usually want a product that fits their surface requirements and production process. The following points describe the main factors to evaluate. Actual performance must be confirmed for the specific product and application.
Support for a Sand-Like or Matte Appearance
A chemical sand finishing process may be selected when the desired surface is less glossy than the untreated aluminum. The exact texture depends on the material, chemical formulation, and treatment conditions.
Before full production, we recommend comparing trial parts with an approved reference sample. This helps the production team judge whether the finish is suitable for the intended product rather than relying only on a general description such as "matte" or "sand-like."
Potential for Consistent Surface Treatment
Consistency is important when many aluminum profiles are used together in the same product or installation. Differences in surface preparation, alloy composition, bath condition, or treatment time can lead to visible variations.
A controlled process helps the manufacturer identify and manage these variables. The chemical product is only one part of the system; equipment condition, operator practice, rinsing, and inspection also matter.
Compatibility With Aluminum Surface Treatment Lines
Many manufacturers use several chemical stages in one production line. A new finishing agent must be considered in relation to the existing degreasing, etching, rinsing, anodizing, coloring, and sealing processes.
We recommend confirming compatibility before changing the bath chemistry or introducing a new product. If the process sequence changes, the trial plan should include the effects on later treatment stages, not just the appearance immediately after chemical finishing.
Support for Decorative Aluminum Products
Surface appearance can be an important purchasing factor for architectural profiles, equipment panels, decorative parts, and consumer-facing products. A suitable finishing process may help the manufacturer achieve the required visual style.
However, a particular appearance does not automatically prove improved corrosion resistance, wear resistance, or coating adhesion. These properties depend on the complete finishing system and should be tested where the product specification requires them.
Process Evaluation Based on Real Production Needs
We encourage customers to define their requirements before choosing a chemical additive. A useful evaluation considers the required finish, alloy grade, production capacity, operating conditions, and quality acceptance criteria.
This practical approach can help manufacturers compare alternatives more fairly. Rather than making unsupported claims about faster processing or lower chemical consumption, the production team can record actual results from a controlled trial.
4. Applications of Acidic Sand Finishing Agent in Different Industries
Aluminum is used in many industries because it is relatively lightweight and can be formed into a wide range of shapes. Surface treatment is often selected to improve appearance or meet the requirements of the final application.
An Acidic Sand Finishing Agent may be considered for suitable aluminum surface finishing operations. The following industries are potential application areas for aluminum sand finishing in general. Suitability for any specific component must be confirmed using the product's technical information.
Architectural Aluminum Profiles
Aluminum profiles are widely used in windows, doors, curtain walls, partitions, and decorative building components. A matte or sand-like finish may be selected to achieve a particular architectural style.
For these applications, manufacturers should pay attention to appearance consistency across long profiles and between different production batches. If anodizing follows the chemical finishing stage, the complete process should be evaluated to confirm that the final surface meets the agreed specification.
Automotive Components
Aluminum is used in selected automotive trim, housings, panels, and other components. Depending on the design, the required finish may be decorative or functional.
Automotive parts may have specific requirements for appearance, corrosion performance, or durability. A finishing chemical should be evaluated against those requirements, and any necessary performance tests should be agreed with the customer.
Electronics and Electrical Equipment
Aluminum housings, panels, and equipment covers may use a matte surface to reduce the visual effect of a highly reflective finish. A controlled surface treatment can help manufacturers work toward a consistent appearance across multiple parts.
If the component includes areas that must remain electrically conductive or meet specific dimensional requirements, the full design and finishing process should be reviewed before selecting a treatment method.
Machinery and Industrial Equipment
Industrial equipment often contains aluminum frames, covers, handles, and protective housings. The surface finish may be selected to match the equipment design or the customer's product standard.
Manufacturers should confirm whether the part needs only a decorative finish or also requires a specified coating system. Chemical finishing alone should not be assumed to provide every protective property required for industrial service.
Aerospace and Precision Components
Aerospace and precision manufacturing may involve strict requirements for materials, dimensions, traceability, and surface quality. Any chemical finishing operation used for these parts must fit the approved process and applicable customer specifications.
The fact that aluminum is used in aerospace applications does not mean that every finishing agent is qualified for aerospace parts. Product suitability must be established through the relevant technical review and approval process.
Medical Equipment and New Energy Products
Aluminum may also be used in equipment housings, selected instrument components, energy-related equipment, and industrial enclosures. Surface requirements vary according to the intended use and the conditions to which the finished component will be exposed.
For these applications, manufacturers should consider cleaning requirements, environmental exposure, appearance, and any relevant regulatory or customer standards. The finishing process should be selected based on the component's actual requirements.
Table 2. Application Requirements for Aluminum Sand Finishing
| Industry | Typical aluminum products | Key points to evaluate |
|---|---|---|
| Architecture | Window frames, doors, curtain wall profiles, decorative trim | Visual uniformity, surface sample, subsequent coating, and exposure conditions |
| Automotive | Selected trim, panels, housings, and components | Customer specifications, appearance, material compatibility, and required testing |
| Electronics | Equipment enclosures, panels, and covers | Matte appearance, dimensional needs, and electrical contact requirements |
| Industrial machinery | Frames, handles, protective covers, and equipment parts | Surface quality, durability requirements, and repeatability |
| Aerospace | Specified precision aluminum components | Approved process, traceability, material control, and formal qualification |
| Medical and new energy | Selected housings and equipment components | End-use conditions, cleaning needs, and applicable product requirements |
Table 2 source note: This is a general application guide based on common aluminum manufacturing uses, not a record of customer projects or a list of certified applications for this product. Industry-specific requirements should be checked with the end customer and relevant standards. General information about aluminum anodizing and its uses is available from the Aluminum Anodizers Council.
5. Process Control, Quality Inspection, and Product Testing
A stable surface finishing process requires more than selecting a suitable chemical. Manufacturers also need a clear product specification, consistent operating procedures, and an inspection method that can identify differences between acceptable and unacceptable parts.
At Huaao Technology, we recommend evaluating a new Acidic Sand Finishing Agent through a controlled trial. This makes it easier to assess whether the product fits the existing line and whether the resulting finish meets the customer's requirements.
Confirm the Alloy and Initial Surface Condition
Aluminum alloys differ in composition and surface behavior. Even profiles made from the same nominal alloy may show differences because of extrusion conditions, machining, storage, or previous treatment.
Record the material grade and inspect representative parts before the trial. If the incoming surface varies significantly, separate those conditions where practical so that the finishing results can be compared fairly.
Review the Bath and Operating Conditions
Use the product's confirmed technical instructions to identify the important process variables. Depending on the formulation, these may include bath concentration, temperature, treatment time, solution condition, and other operating controls.
Operators should record the relevant values during the trial. If the results are unsatisfactory, the records help the production team investigate the cause instead of making random adjustments.
Use a Controlled Trial Plan
Begin with representative test parts and an agreed inspection standard. Keep the material, surface preparation, and other important conditions as consistent as possible between the existing process and the trial process.
If a change is needed, follow the product-specific technical instructions and the facility's approved procedures. Do not assume that an adjustment suitable for one acid finishing product will work with another formulation.
Inspect Appearance and Downstream Performance
Check the treated surface under consistent lighting and viewing conditions. Look for differences in texture, streaks, stains, uneven areas, and other defects defined by the customer's acceptance standard.
If the part will undergo anodizing, coloring, sealing, or another treatment after sand finishing, evaluate the complete process where appropriate. A surface that looks acceptable immediately after chemical treatment may not necessarily produce the required final appearance after subsequent steps.
Where the final product has specified coating requirements, use the relevant test methods and acceptance criteria. The QUALANOD organization provides quality requirements and guidance for anodized aluminum. Its requirements may be relevant to certain anodized products, but they should not be treated as a universal standard for every chemical sand finishing process.
Table 3. Suggested Quality Evaluation Checklist
| Evaluation item | Information to record | Purpose |
|---|---|---|
| Material identification | Alloy grade, part type, batch, and dimensions | Confirm that trial parts represent the intended production material |
| Incoming surface | Visible defects, contamination, and pretreatment condition | Identify problems that may affect the final appearance |
| Process settings | Relevant bath measurements, temperature, and treatment time | Support process control and repeatability |
| Surface appearance | Texture, uniformity, streaks, stains, and sample comparison | Check whether the intended finish has been achieved |
| Subsequent treatment | Results after anodizing, coloring, sealing, or other required steps | Confirm compatibility with the full production sequence |
| Production observations | Cycle time, rework, bath maintenance, and process interruptions | Evaluate the practical impact on production |
| Final decision | Accept, repeat the trial, or review the process | Document the decision using agreed acceptance criteria |
Table 3 source note: This checklist was prepared for practical process evaluation and contains no measured product performance data. The final inspection items should be selected according to the actual application, the product specification, and any applicable customer or industry standards.
How to Compare Two Finishing Methods
If you are comparing an acidic chemical finishing method with another surface treatment method, use the same part type and clearly defined acceptance criteria. The comparison should include the finished appearance, repeatability, production time, material compatibility, chemical handling requirements, and any additional processing needed.
Mechanical blasting and chemical finishing do not create identical surface conditions. The correct choice depends on the desired texture, part geometry, production capacity, and subsequent coating requirements. Neither method should be described as universally better without considering the application.
We recommend using documented trial results to support purchasing decisions. We do not publish unverified figures for surface roughness, chemical savings, processing speed, or defect reduction. Any numerical performance claim should be supported by appropriate product-specific test data.
6. Why Choose Jianli Huaao Technology Co., Ltd.?
Choosing a chemical supplier is an important decision for an industrial production line. Buyers need to understand what a product is intended to do, whether it fits their process, what documentation is available, and how orders and technical questions will be handled.
More Than 20 Years of Industry Experience
Jianli Huaao Technology Co., Ltd. has been dedicated to aluminum profile surface treatment for over two decades. Our business includes research and development, production, and sales of chemical additives, as well as technical consulting and the trading of electroplating and magnetic raw materials.
Our long-term focus on aluminum surface treatment has given us experience with a wide range of pretreatment and finishing products. We use this background to help customers discuss their applications and identify the technical details that should be confirmed before selecting a chemical solution.
A Broad Range of Surface Treatment Chemicals
Our product portfolio includes aluminum alloy chemical sandblasting agents, Smokeless mirror polishing agents, long-life alkaline etching agents, titanium gold and golden electrolytic coloring stabilizers, copper-colored electrolytic coloring stabilizers, low-temperature, medium-temperature, and high-temperature sealing agents, bright acid etching sand surface agents, neutralization brightening agents, champagne and bronze coloring stabilizers, environmentally friendly single-tin salt pearl black coloring stabilizers, low-temperature polishing agents, degreasing and dewaxing agents, chromium-free passivation agents, and other products.
This range serves different needs within aluminum surface treatment. However, products intended for different process stages are not automatically interchangeable. We recommend confirming the intended use and compatibility of each chemical before introducing it into a production line.
Production Facilities and Quality Assurance
We have production facilities, precision testing instruments, and a quality assurance system to support our manufacturing activities. We understand the importance of clear product identification, suitable quality checks, and reliable communication between suppliers and customers.
The appropriate inspection criteria depend on the product and the order requirements. Before purchasing, customers can discuss available product information, packaging requirements, and the quality documents relevant to their application.
Technical Communication That Starts With Your Process
Every aluminum finishing line has its own conditions. We encourage customers to share their alloy type, current treatment sequence, desired surface appearance, and any important quality requirements when making an inquiry.
This information helps us understand the application and determine which product details need to be checked. Our approach is practical: confirm the requirements, review the available technical information, and evaluate suitability before making a production change.
Manufacturing Location and Industry Background
Our company is located in Huazhong Ecological Aluminum Demonstration Industrial Park in Jianli, Hubei, China. We are a standing council member of the China Non-Ferrous Metals Processing Industry Association.
We continue to focus on aluminum surface treatment chemicals and related industrial materials. Our aim is to build lasting business relationships through product knowledge, clear communication, and dependable order coordination.
Production Lead Time, Packaging, and Shipping
Our usual production cycle is approximately 3–10 working days. The actual lead time depends on product availability, material requirements, order quantity, production scheduling, and other order-specific factors. Please confirm the estimated delivery date with our team before placing an order.
Payment terms may include advance payment, payment on delivery, or monthly settlement, subject to agreement between both parties. Shipping options may include express delivery, logistics services, or dedicated vehicle transport, depending on the shipment size, destination, and applicable shipping requirements.
Packaging is selected according to the product and transportation needs. Options may include protective foam, bubble wrap, dividers, cartons, or wooden cases where appropriate. Chemical products must be packaged and transported in accordance with their actual classification and the applicable safety and shipping regulations.
We recommend confirming the product specification, quantity, delivery schedule, packaging arrangement, and required documentation before the order is finalized. Clear agreement at the beginning helps both parties manage the purchasing process more efficiently.
7. Safe Handling, Storage, and Environmental Considerations
Because the product is described as an acidic finishing agent, chemical safety should be considered before use. However, the actual hazards cannot be determined from the product name alone. The specific formulation, concentration, and classification must be confirmed using the current Safety Data Sheet (SDS) and product label.
Follow the Product Safety Instructions
Before opening or using the product, make sure the operators have access to the applicable SDS and understand the site's chemical-handling procedures. Use the personal protective equipment required by the product documentation and workplace risk assessment.
Depending on the confirmed hazards and the way the product is used, controls may include suitable gloves, eye protection, protective clothing, ventilation, and access to emergency washing equipment. The exact requirements should be determined from the product's safety information rather than from a generic description of acid chemicals.
Storage and Compatibility
Store the chemical in its identified container and follow the recommended storage conditions. Keep containers properly closed when not in use, and follow the product-specific instructions for temperature, segregation, and handling.
Do not mix the product with other chemicals unless the approved technical procedure specifically allows it. Uncontrolled mixing may cause unwanted reactions or affect the finishing bath. If the product is intended to be added to an existing treatment system, confirm compatibility before use.
Wastewater and Process Residues
Aluminum surface treatment operations may generate spent solutions, rinse water, and other residues that require appropriate management. The correct treatment method depends on the chemicals involved and the applicable local environmental requirements.
Manufacturers should review chemical consumption, wastewater management, waste handling, and worker protection when evaluating a finishing process. We do not recommend describing any chemical product as environmentally harmless without supporting evidence and a clear definition of the claim.
For general information about chemical labels, Safety Data Sheets, and workplace hazard communication, refer to the U.S. Occupational Safety and Health Administration Hazard Communication Standard. This is a general reference and does not replace the laws and regulations applicable to the customer's location.
We encourage buyers to request the available technical and safety documentation before evaluating the product. A suitable chemical solution should fit both the production requirements and the facility's safety management system.
8. Frequently Asked Questions About Acidic Sand Finishing Agent
Q1. What is an Acidic Sand Finishing Agent used for?
It is intended for compatible aluminum and aluminum alloy surface finishing processes where a sand-like or matte appearance is required. The exact application should be confirmed using the product-specific technical information.
Q2. Is chemical sand finishing the same as mechanical sandblasting?
No. Mechanical sandblasting uses abrasive particles to change the surface texture, while chemical finishing relies on the action of a treatment solution. The resulting appearance and surface condition may differ. The suitable method depends on the part, desired finish, and subsequent process requirements.
Q3. Can this product be used on all aluminum alloys?
Not necessarily. Different alloys can respond differently to chemical treatment. Confirm the alloy grade, initial surface condition, and intended application before using the product in production.
Q4. What are the recommended temperature and treatment time?
The exact operating parameters should be taken from the current product technical data or confirmed by our team. We do not recommend using generic values because different formulations and process conditions may require different settings.
Q5. Can the agent be used before anodizing?
It may be considered for a compatible process sequence, but suitability depends on the formulation, alloy, and anodizing requirements. The complete treatment sequence should be evaluated to confirm that the final coating meets the agreed appearance and performance standards.
Q6. Does a sand finishing agent improve corrosion resistance?
The answer depends on the complete surface treatment system. A particular matte appearance does not by itself prove improved corrosion resistance. Where corrosion performance is required, use the applicable coating process and test method to verify the result.
Q7. How can I check whether the surface finish is uniform?
Compare representative parts with an approved sample under consistent lighting and viewing conditions. Check for uneven texture, streaks, stains, and other defects defined by the customer specification. For critical products, document the inspection method and acceptance criteria before production.
Q8. Can the product be used in an existing production line?
Compatibility should be confirmed before introducing the product. Review the current pretreatment sequence, bath chemistry, equipment, and later finishing stages. A controlled trial is recommended before making a full production change.
Q9. What information should I provide when requesting a quotation?
Please provide your intended application, aluminum alloy, current finishing process, desired surface appearance, estimated quantity, delivery destination, and target delivery date. If available, include a reference sample, technical specification, or customer acceptance standard.
Q10. Can Huaao Technology provide technical support?
Yes. We can discuss your application and the technical information needed to evaluate product suitability. Recommendations should be based on confirmed product documentation and the actual conditions of your production line.
Q11. What is the usual production lead time?
Our usual production cycle is around 3–10 working days. The actual schedule depends on the product, quantity, material availability, and order requirements. Please contact us to confirm the lead time for your order.
Q12. How is the product packaged and shipped?
Packaging and shipping arrangements depend on the product's properties, shipment size, destination, and applicable regulations. Available transport options may include express delivery, logistics services, or dedicated vehicle transport where suitable.
Q13. What documents should I request before purchasing?
Ask for the current product technical information, applicable Safety Data Sheet, product identification details, and any agreed quality documentation. Confirm the operating instructions and handling requirements before the chemical is introduced into your production process.
Contact Huaao Technology for Your Aluminum Surface Treatment Needs
If you are looking for an Acidic Sand Finishing Agent for aluminum surface treatment, Jianli Huaao Technology Co., Ltd. welcomes inquiries from aluminum profile manufacturers, surface treatment plants, industrial chemical distributors, and other B2B buyers.
With more than 20 years of experience in aluminum surface treatment chemicals, we understand the importance of matching a product to the actual manufacturing process. We encourage customers to share their requirements so that the appropriate technical information can be reviewed before product selection.
To help us understand your needs, please include the following details in your inquiry:
Product name: Acidic Sand Finishing Agent
Aluminum alloy grade and product type
Current surface preparation and finishing process
Required matte or sand-like surface appearance
Any subsequent anodizing or other treatment requirements
Estimated order quantity and expected delivery date
Relevant technical specifications and safety documentation needs
We are committed to providing clear product information, practical communication, and order coordination based on the agreed requirements. Contact our team to discuss your application and confirm whether this product is suitable for your aluminum surface finishing process.

WhatsApp
Phone
E-mail
Message