Login | Register
产品中心
Home > Products > Aluminum and aluminum alloy casting series auxiliaries > Aluminum titanium boron wire (Bar)

Aluminum titanium boron wire (Bar)

1.Main Features:

1) This product is Ф9.5mm wire rolled with advanced equipment and wound into bundle with bright silvery white and clean appearance and neat and close arrangement.

2) During casting of aluminum bar, it is added from launder to reduce burning caused by furnace feeding.

3) Titanium and boron are evenly distributed with low use level.

2.Thinning advantages:

1) It can improve internal structure of aluminum bar obviously.

2) It can improve final mechanical performance of product to a great extent.

3) It can reduce extrusion pressure, reduce energy consumption and die loss.

4) It can improve extrusion speed and production efficiency.

5) It can improve rate of finished product.

6) It can improve uniformity and brightness of oxidation coloring.

3.Technical parameters:

1) Content of Ti:4.5-5.5%,B:0.8-1.2%,Al:Margin

2) Nominal diameter of product Ф9.5mm wire, deviation 0.5mm.

3) Bundle diameter 360±25mm,750±25mm

4) Bundle weight 170±20kg

5) Calculation of bundle length:length (m) =Bundle weight (kg)÷0.192 (kg/m)

6) Wire elongation rate:δ50≥12%

4.Use method:

   The adding rate shall be calculated in accordance with titanium content of alloy to be produced.It can be charged from launder through electric withdrawing or hand operation.

5.Packaging and storage:

   It uses transparent plastic film for packaging with wooden tray on the bottom.The warranty period is one year.


<span style="font-size: 16px;"><a href='https://www.huaaochemtech.com/tag/aluminum-titanium-boron-wire' target='_blank' class='key-tag'><font><strong>Aluminum titanium boron wire</strong></font></a> (Bar) | AlTiB Grain Refiner</span>

At Jianli Huaao Technology Co., Ltd., we discuss aluminum titanium boron wire and bar as grain-refining inputs for aluminum casting. We begin with the alloy, required cast structure, existing treatment practice, and feeding arrangement. Those details help us review a material requirement that your production and quality teams can assess together.

We bring more than two decades of experience in aluminum profile surface treatment, together with additive development, production, raw material trading, and technical consulting. For casting auxiliary inquiries, we connect product selection with the customer's process and confirm the specifications, documents, packaging, and commercial terms for the actual offer.

1. What We Mean by Aluminum Titanium Boron Wire and Bar

Aluminum titanium boron, often shortened to AlTiB, is an aluminum-based master alloy containing titanium and boron. It is used to support grain refinement during the solidification of aluminum. We identify the composition and supplied form together because the product name alone leaves important purchasing details open.

In this context, a grain is a crystal region within the solidified metal. Grain refinement aims to encourage a finer, more uniform as-cast structure. The required result depends on the alloy and casting process, so we do not attach one guaranteed grain size to every AlTiB product.

The names wire and rod are often used for coiled material supplied to a feeding system. Bar may describe cut lengths or another solid form. We confirm the dimensions, unit weight, and handling arrangement rather than assuming those names establish a standard size.

We also distinguish nominal grade from actual composition limits. A familiar label such as AlTi5B1 is useful for identifying a grade family, but the purchasing document still needs permitted ranges, impurity limits, and any additional quality requirements.

For an aluminum titanium boron wire supplier inquiry, send us the target alloy, current grain-refining practice, required product form, quantity, and delivery destination. If you already use an approved specification, we prefer to review that document directly.

Tell us whether the order is routine replenishment, a supplier change, or a new application. A repeat purchase may follow an established approval, while a new source or form may need a representative trial before production release.

We also ask which result controls the customer's approval. A grain-size target, feeder requirement, and finished-component test are different acceptance topics. Identifying them early helps the inquiry reach the right technical review and avoids treating a matching grade name as proof that every requirement has been met.

Huaao manufactures aluminum surface-treatment additives and trades raw materials. Our company background does not establish that we produce AlTiB master alloy ourselves. We confirm the offered material, supply basis, and available evidence for the order.

Product context: Pyrotek, “Aluminium Grain Refiners”; AMG Aluminum, “Grain Refiners.” These references establish grain-refiner application context, not Huaao production capability or grade availability.

2. How AlTiB Supports Grain Formation

As an aluminum melt solidifies, crystals begin forming and grow. A grain refiner provides conditions that help more grains start and can help control their growth. We explain this as support for the solidification process, rather than as a simple increase in the melt's titanium percentage.

Common AlTiB grain refiners contain titanium diboride particles, written TiB2, and titanium aluminide, commonly written Al3Ti. The aluminum-rich matrix carries these constituents into the treatment process. Their roles differ, which is why chemistry and particle structure both deserve attention.

TiB2 particles can act as substrates that help aluminum grains begin. Titanium aluminide can dissolve and contribute titanium to the melt. The detailed response depends on the alloy and interfacial conditions, so we avoid treating every particle as an equally active grain-starting site.

Table 1. Typical constituent sizes described in a reference AlTiB datasheet
ConstituentPublished typical sizeRole described in the reference
Titanium diboride, TiB21–2 µmGrain-refining nucleant particles
Titanium aluminide, Al3Ti30–50 µmLarger plates that dissolve in liquid aluminum

Source: AMG Aluminum, “Titanium Boron Aluminium Grain Refiners” datasheet. These are the supplier's typical constituent descriptions, not Huaao particle-size guarantees or final casting grain sizes. One millimeter equals 1,000 micrometers.

The particle dimensions in the table describe material within the grain refiner. They are different from the grain size measured in a casting. We keep those measurements separate when reviewing a product report or a trial result.

We also distinguish grain refinement from degassing and inclusion removal. An AlTiB addition should not be treated as a substitute for the plant's hydrogen-control or filtration system. The complete melt-treatment sequence still needs its own controls.

A finer grain structure can be relevant to casting behavior and product consistency, but it does not establish every mechanical property or eliminate every defect. We assess the result against the customer's actual part and process requirements.

Mechanism context: AMG Aluminum, “Grain Refiners”; Pyrotek, “Aluminium Grain Refiners”; published research on TiB2-based nucleation and alloy-dependent grain-refining response.

3. Comparing Common Ti/B Grade Labels

We compare titanium and boron together when reviewing a grade. A higher titanium number does not automatically make a refiner better for every alloy. The balance between constituents and the customer's casting practice matters.

The examples below describe nominal grade labels found in published product information. They are not complete composition specifications or a Huaao stock list. Actual orders need agreed ranges and relevant impurity limits.

Table 2. Nominal composition comparison for reference grade families
Reference grade labelNominal titaniumNominal boronNominal Ti:B mass ratio
AlTi5B15.0%1.0%5:1
AlTi3B13.0%1.0%3:1
AlTi5B0.25.0%0.2%25:1

Source: nominal alloy families listed in AMG Aluminum, “Titanium Boron Aluminium Grain Refiners.” Ti:B ratios are calculated from the nominal mass percentages. These ratios are not addition rates or performance rankings, and the percentages are not batch results.

We ask for the alloy's existing titanium and boron information before discussing a replacement. The refiner adds material as well as influencing solidification. The final alloy must remain within its permitted composition range.

The amount of recycled or secondary metal can also be relevant. We prefer a representative charge and melt analysis rather than assuming that two heats begin with the same background composition.

Some alloying elements can change the response to conventional AlTiB refiners. Research has examined effects associated with silicon and zirconium, often described as poisoning. In plain terms, the same addition may become less effective in a different alloy environment.

We do not turn that observation into a universal limit or a fixed correction. The actual alloy, treatment history, holding conditions, and required structure need review. More grain refiner is not automatically the correct response to an unexpected result.

For a new source or grade, we recommend qualification against the customer's existing process. Compare the relevant composition, cast structure, and finished-product criteria rather than relying on the nominal grade name alone.

The nominal ratio in the table is calculated from bulk titanium and boron percentages. It does not describe an atomic ratio, a particle count, or an addition rate. We keep that distinction clear so the composition comparison is used for the purchasing question it can actually answer.

Selection references: AMG Aluminum, “Grain Refiners”; “Mechanism for Si Poisoning of Al-Ti-B Grain Refiners in Al Alloys”; “Grain refinement by Al–Ti–B alloys in aluminium melts: A study of the mechanisms of poisoning by zirconium.”

4. Choosing Wire, Coiled Rod, or Bar

Coiled material for controlled feeding

Coiled AlTiB rod can support continuous addition through a suitable feeding system. We review the rod dimensions, coil arrangement, feed equipment, and process requirements together. A matching chemical grade does not establish that every coil will run correctly in the customer's feeder.

Diameter, dimensional variation, coil weight, and winding condition may affect handling. If the equipment has defined limits, include them in the inquiry. We confirm the offered form against those limits rather than assuming one common nominal diameter fits every installation.

Feeder settings also need a valid material basis. Length delivered and mass delivered are different measurements. The plant should use the appropriate calibration and product information when checking the actual addition.

We also review the coil as a handling package. The receiving site may have limits for lifting, support, or access to the feeder. Include those requirements with the dimensional specification so the proposed supply fits the equipment and receiving arrangement as well as the requested chemistry.

Cut lengths and bars

Cut rod or bar may suit an operation with a defined batch-addition procedure. We discuss length, cross-section, unit weight, permitted variation, and handling needs. The customer's technical team determines the approved method for the specific operation.

We do not assume wire and bar are interchangeable solely because their nominal chemistry matches. Distribution, addition timing, equipment, and residence before casting may differ. A form change should be reviewed as part of the process qualification.

Applications across aluminum production

AlTiB grain-refining products are relevant to aluminum casthouses and foundries producing material for further processing or finished castings. We discuss the actual alloy and required structure, rather than assigning a grade only from the customer's industry.

These operations may serve automotive parts, machinery, electrical equipment, and general engineering markets. The addition supports a qualified casting process; it does not by itself establish approval for a particular component or end use.

For billet used in profile extrusion, we also consider the customer's downstream requirements. Grain refinement is one part of upstream quality control and should remain connected to the broader casting, extrusion, and finishing process.

Form and application context: AMG Aluminum grain-refiner product information and rod-feeding references; Pyrotek, “Aluminium Grain Refiners.” Dimensions, coil weights, and addition practices require confirmation for the offered product and equipment.

5. Quality Requirements Beyond Ti and B Percentages

We prefer a specification that covers chemistry, physical form, and the evidence needed for acceptance. Two products with similar titanium and boron results can still require different reviews if their particle condition, handling characteristics, or qualification information differs.

Chemical composition

We discuss titanium and boron ranges alongside any relevant limits for silicon, iron, vanadium, or other constituents. These are examples of requirements to confirm, not a promise that every test is included with every offer.

Composition limits need units and a clear reporting basis. The COA should distinguish the specification from the batch information supplied. A result reported below a laboratory reporting limit needs a limit suitable for the customer's acceptance decision.

Particle structure and distribution

Where the application requires microstructure evidence, the specification should define what is assessed. Particle size, distribution, or agglomeration may be relevant. A chemical assay alone does not describe the arrangement of constituent particles within the master alloy.

We also ask how the inspection sample is selected and measured. A micrograph from one location does not automatically establish every characteristic of an entire coil or batch. The sampling and reporting basis should match the quality decision.

If the customer requires a microstructure report, the preparation, measurement method, and reporting criteria should be agreed. Images can be useful supporting evidence, but an unlabelled image is difficult to compare with a numerical acceptance limit. We prefer reports that identify what was measured and the sample represented.

Physical condition and traceability

For coiled rod, the receiving criteria may include dimensions, winding condition, surface condition, and identification. For bar or cut lengths, they may include unit weight and geometry. The important requirements come from the equipment and approved handling procedure.

We confirm which reports and documents are available during quotation. If an independent test or customer-specific inspection is required, the method, sampling arrangement, cost, and acceptance basis should be agreed beforehand.

Batch references should remain connected with the product labels, quality documents, and trial records. That connection makes an unexpected result easier to investigate and helps the customer identify which material was used in a particular casting run.

We keep statements about grain-refining performance separate from incoming chemistry. A product can meet its chemical specification while the customer's process still needs qualification for the intended cast structure.

Quality context: Arconic, “AlTi5B1 rod Specification,” which treats chemical composition, microstructure, and uniformity as distinct requirements; AMG Aluminum grain-refiner technical documentation. These reference requirements are not Huaao guarantees.

6. Assessing Grain Refinement in a Representative Trial

We start a trial with the structure or production requirement the buyer needs to assess. The question might concern grain size, uniformity, consistency over a casting run, or compatibility with the existing feed system. A clear question makes the evidence more useful.

We suggest recording the refiner batch, actual quantity, base alloy analysis, relevant temperatures, holding history, casting conditions, and sampling method. The customer's technical team establishes the operating procedure and approves the test conditions.

Time matters because the metal's treatment history can affect the response. A short laboratory observation may not represent a longer production holding period. We ask buyers to define the period and conditions their qualification needs to cover.

We also keep the measurement clear. Constituent particle size within the refiner, grain size in a laboratory sample, and structure in a production casting are different results. A report should identify what was measured and how.

For a fair source comparison, keep the relevant conditions sufficiently consistent. Changing refiner grade, addition arrangement, alloy composition, and cooling conditions together can make it difficult to identify which change affected the result.

We do not equate the smallest measured grain size with the best result for every component. Casting properties depend on the complete process, and the trial should include the customer's relevant acceptance criteria. More addition is not automatically better.

Consumption should be recorded on a common basis too. Kilograms of master alloy, titanium contributed, and boron contributed are different quantities. Comparing the price per kilogram of refiner alone may miss a composition difference between grades.

If a trial does not meet the target, we review the incoming material information and process record together. The aim is to reach a supported decision about suitability, rather than assigning the cause from one observation.

Once approved, the customer can retain the material specification and trial conditions as a qualification record. A later change in composition, form, feed system, or process should be reviewed against that basis.

Where consistency during a production run is the main concern, the trial should cover the relevant part of that run. Startup, later production, and a restart may need separate observations. We ask the buyer to define the approval scope rather than extending one successful sample to every operating condition.

Trial context: Boot, Cooper, StJohn, and Dahle, “A Comparison of Grain Refiner Master Alloys for the Foundry,” 2002; published research on alloy-dependent AlTiB performance. Study conditions and results are not universal operating recommendations.

7. Working With Huaao: Packaging, Documents, and Delivery

We have worked in aluminum profile surface treatment for more than two decades. Our business combines research, additive production, raw material trading, and technical consulting. That experience helps us understand why an upstream material decision needs to fit a wider manufacturing sequence.

We are located in the Huazhong Ecological Aluminum Demonstration Industrial Park in Jianli, Hubei. Huaao Technology serves as a standing council member of the China Non-Ferrous Metals Processing Industry Association. Our facilities, testing instruments, and quality assurance system support our additive business.

Our additive development experience includes chemical sandblasting agents, alkaline etching agents, degreasing and de-waxing agents, coloring stabilizers, sealing agents, and chromium-free passivation agents. We bring that process awareness to casting auxiliary inquiries while keeping AlTiB claims tied to the actual offer.

Packaging is confirmed according to form and quantity. Coils may require supported, secured arrangements, while cut rod or bar may need protected bundles or other suitable packing. We review package weight, lifting needs, contamination protection, and receiving equipment before finalizing the shipment.

Dry storage and inspection matter around molten-metal operations. Water or wet contamination entering molten metal can cause violent explosions. The plant must follow its approved receiving, preparation, and addition procedures; package appearance alone does not establish that material is ready to use.

We confirm production or stocking time according to the specification, availability, order quantity, and destination. We do not assign a single lead time to every grade or form. The quotation establishes the proposed schedule.

Sea or road transport may be considered where suitable. Air shipment depends on product classification, packaging, route, and carrier acceptance. Any applicable dangerous-goods requirements must be checked for the actual shipment.

Delivery follows the contract's agreed technical indicators, quantity, packaging, and documents. COA, current SDS or applicable product safety information, and additional paperwork can be discussed during quotation. Payment may be negotiated through T/T or a letter of credit.

The delivery basis and included charges should be clear in the offer. If your team needs document approval before dispatch or has special unloading restrictions, tell us early so the supply arrangement can account for them.

Label and paperwork requirements should be agreed at the same time. Your receiving team may need a particular alloy description, batch reference, or net-weight statement to connect the packages with the approved purchase record. We review those details before the order is finalized.

Handling reference: UK Health and Safety Executive, “Safety hazards in the molten metal industries” and foundry risk-assessment guidance. Actual handling requires the product information and approved site procedures.

8. Aluminum Titanium Boron Wire and Bar FAQ

Is AlTiB wire the same as coiled rod?

The names may be used for similar supplied forms, but we confirm the actual dimensions and coil requirements. A product name alone does not establish compatibility with a particular feeder or the required handling arrangement.

Can you offer AlTi5B1 or AlTi3B1?

We confirm available grades and specifications during quotation. The grade comparison contains published reference examples, not stock commitments. Send the required chemistry, form, dimensions, quantity, and destination so we can review the specific inquiry.

Does higher titanium content always improve refinement?

No. We assess the Ti/B balance, base alloy, treatment history, and required structure together. The nominal titanium percentage alone is not a performance ranking. A representative qualification trial is more useful than selecting the largest number.

Are TiB2 particle size and casting grain size the same?

No. The first describes constituent particles in the refiner; the second describes crystal regions in the solidified metal. We keep those measurements separate when reviewing technical documents and assessing a casting trial.

Can one grade suit every aluminum alloy?

We do not assume that. Alloy chemistry and process conditions can affect AlTiB response. Tell us the actual alloy and required result so the offered material can be reviewed against the appropriate qualification criteria.

Does the grain refiner replace degassing or filtration?

No. We treat grain refinement, hydrogen control, and inclusion removal as distinct process objectives. Each needs the relevant equipment, treatment method, and quality checks within the customer's approved casting sequence.

Can you provide a universal addition rate?

We need the product specification, alloy analysis, existing treatment, and qualification evidence before discussing an addition requirement. A figure from an unrelated casting operation should not be transferred automatically to another process.

What should we send for a quotation?

Send the alloy, required AlTiB grade, form, dimensions, feed-system requirements, quantity, packaging preference, and destination. Include required documents and trial criteria. We can then review a concrete offer against a clear purchasing brief.

ONLINE MESSAGE

Please fill in a valid email address
Captcha Can not be empty

RELATED PRODUCTS

No search results found!
chat

Online Customer Service

×

This website uses cookies to ensure you get the best experience on our website.

Accept Reject