We use “thinning” here to mean grain refinement: making the metal's internal crystal structure finer as it solidifies. It does not mean thinning a liquid coating or automatically making molten aluminum flow more easily. For purchasing and technical discussions, we also use the clearer terms Titanium Boron Grain Refiner and aluminum grain refining additive.
We focus on process compatibility, batch consistency, and clear delivery requirements. Tell us your alloy grade, furnace practice, and casting target, and we can discuss the product specification and a sensible evaluation plan before you commit to routine production.
What We Look for in a Titanium Boron Grain Refiner
We treat this additive as one part of melt control. A foundry may have the right alloy chemistry and still struggle with uneven structure across a casting. Grain refinement addresses how aluminum crystals begin and grow during cooling. That makes it a useful subject to investigate when your concern involves the cast structure.
When we discuss an Al–Ti–B grain refiner, we mean an aluminum-based material containing titanium and boron. The exact composition, physical form, and acceptance limits must be confirmed for the selected product. A product name alone is not enough to establish any of those details.
We therefore begin with your actual production information. A sand casting foundry pouring separate ladles has different handling needs from a plant feeding a continuous casting line. Even two plants casting the same nominal alloy can need different addition practices because their holding times, return-metal content, and cooling conditions differ.
We also ask how you judge success. Perhaps you need a specified grain size in a test sample. Perhaps you are investigating hot cracking, variation in elongation, or inconsistent machining results. These are different targets, and we would not use one measurement to stand in for all of them.
For a titanium boron thinning additive for aluminum casting, we want the purchase specification to connect directly with the trial. That means identifying the material, agreeing what will be checked, and recording how it will be added. Clear starting conditions make the results easier to explain later.
We can discuss selection for automotive parts, machinery components, electrical and electronic castings, and general foundry work. Suitability depends on the alloy and process, rather than the industry name printed on the inquiry. We prefer a short technical conversation at the beginning to repeated adjustments after delivery.
How We Explain the Grain Refining Action
We explain aluminum solidification in plain terms: the liquid metal turns into many small crystals, called grains. A grain refiner helps provide places where those crystals can start. With suitable melt chemistry and cooling conditions, more effective starting sites can produce a finer, more evenly shaped grain structure.
In conventional aluminum titanium boron master alloys, titanium diboride, written as TiB2, supplies particles associated with this starting process. The aluminum carrier joins the melt, while the titanium-bearing phases and dissolved titanium also contribute to the treatment. We do not describe the action as simply dissolving boron into aluminum.
We draw this basic explanation from AMG Aluminum'sTitanium Boron Aluminium Grain Refinerstechnical datasheet. It describes the different behavior of TiB2 particles and titanium aluminide phases in liquid aluminum. These are general material principles, not measurements of a Huaao shipment.
We also account for the role of particle surfaces. Fan and colleagues, inGrain refining mechanism in the Al/Al–Ti–B system, reported that a titanium-rich surface layer can improve the ability of TiB2 particles to start aluminum grains. Their work also connects effective refinement with sufficient dissolved titanium. In everyday terms, the particles and their surroundings need to work together.
We distinguish this process from several other foundry treatments. Degassing targets dissolved gas. Fluxing and filtration address aspects of melt cleanliness. Silicon modification changes the form of silicon in suitable aluminum-silicon alloys. Grain refinement primarily concerns the aluminum grain structure. We consider these treatments together when planning a trial, while keeping their functions clear.
We also keep expectations realistic. A finer grain structure may support better casting behavior, but it does not guarantee a particular tensile strength, remove every pore, or correct poor feeding. We evaluate the finished casting against your requirements because the practical result depends on more than the additive.
How We Compare Reference Grades and Addition Quantities
We use published industry grades to explain composition differences before discussing a supply specification. The table below compares three familiar Al–Ti–B designations. These are external reference compositions, not confirmed Huaao grades, stock items, or guaranteed assay limits.
| Reference designation | Titanium, nominal wt.% | Boron, nominal wt.% | Aluminum | Ti:B mass ratio |
|---|---|---|---|---|
| AlTiB5/1 | 5 | 1 | Balance | 5:1 |
| AlTiB3/1 | 3 | 1 | Balance | 3:1 |
| AlTiB5/0.2 | 5 | 0.2 | Balance | 25:1 |
Source: KBM Affilips,Aluminium-titanium-boron (AlTiB), official product composition listing. We calculated the mass ratios from the listed nominal percentages. Weight percentages describe the additive, not the treated aluminum melt.
We read these figures as a starting point for selection. At the same addition mass, the 5/1 reference introduces more titanium than the 3/1 reference, while both introduce the same nominal boron mass. The 5/0.2 reference has a different balance again. Those differences matter when your base alloy already contains titanium or when final chemistry limits are tight.
We would not rank refining performance from these numbers alone. Composition does not fully describe particle distribution, particle condition, or behavior in your melt. Two materials carrying the same grade designation still need an agreed specification and a meaningful production evaluation.
We also separate addition calculations from dosage advice. The next table shows what three illustrative quantities of a nominal 5% Ti, 1% B material contain. We use a 1,000 kg starting melt only to keep the arithmetic easy to follow.
| Additive per 1,000 kg starting melt | Addition relative to starting melt | Titanium introduced | Boron introduced |
|---|---|---|---|
| 0.5 kg | 0.05% | 0.025 kg / 25 g | 0.005 kg / 5 g |
| 1.0 kg | 0.10% | 0.050 kg / 50 g | 0.010 kg / 10 g |
| 2.0 kg | 0.20% | 0.100 kg / 100 g | 0.020 kg / 20 g |
Source: our mass-balance calculations using the nominal AlTiB5/1 composition published by KBM Affilips. Additive mass × 0.05 gives titanium input; additive mass × 0.01 gives boron input. These are theoretical material inputs, not measured recovery, final melt assays, performance results, or recommended operating doses.
For your production calculation, we would also include the titanium and boron already present, the actual batch assay, and any process losses. If final concentration is required, we use the final metal mass, including the addition. We then check the result against your alloy specification before discussing an operating range.
We keep the commercial decision equally practical. A lower price per kilogram does not automatically mean a lower treatment cost. We compare the amount consumed, the measured result, and the handling involved under comparable conditions.
The Features We Focus on During Product Evaluation
Compatibility with your alloy
We ask for the alloy designation and a recent chemistry report whenever possible. The grade name is helpful, but the actual composition gives a clearer picture when you use recycled material or substantial internal returns. We also want to know which other melt additions you already make.
We pay particular attention to alloys containing silicon or zirconium. Published research shows that these elements can interfere with conventional Al–Ti–B refinement under certain conditions. We use “poisoning” only in this technical sense: reduced refining effectiveness. It is not a statement about human toxicity.
We base that caution on Bunn and colleagues' study of zirconium interference and Fang, Wang, and Fan's research into silicon interference. We therefore avoid claiming universal suitability for every aluminum alloy.
Consistency that can be checked
We want the agreed product characteristics to be measurable. Depending on the selected material, the purchase specification may cover composition, impurity limits, physical form, and packaging. Where refining performance is an acceptance requirement, we also need an agreed test method and sample conditions.
We separate the certificate of analysis from application performance. A COA can report specified batch results, but it does not by itself prove the grain size your casting will achieve. We connect document checks with a trial rather than asking either one to answer every question.
Handling that fits production
We discuss the addition method before confirming form and pack size. Your operators need a material that can be weighed, identified, stored, and introduced using the plant's approved equipment. Convenience matters because awkward handling can turn a reasonable laboratory result into an unreliable shop-floor practice.
We judge the advantage of a titanium boron grain refining additive by how well it fits a controlled process. A useful product should help your team achieve an agreed result repeatedly, with a clear record of what changed and why.
Where We Discuss Its Use in Aluminum Casting
Automotive components
For automotive aluminum castings, we begin with the part drawing, alloy requirements, and quality checks. A housing and a loaded bracket can have very different acceptance criteria. We would evaluate grain refinement alongside the properties that matter for the specific component, rather than applying a general strength claim.
We also ask which casting route you use. Sand casting, gravity die casting, low-pressure casting, and high-pressure die casting have different thermal histories. In a rapidly cooled process, we would first establish whether additional grain refinement gives a measurable benefit before building a routine addition into production.
Machinery and general engineering
For machine parts, we discuss section thickness, machining allowance, and the defects being investigated. If you are comparing tool life or surface finish, we want the cutting conditions recorded too. Otherwise, a tooling change can be mistaken for an effect of the aluminum casting grain refiner.
We pay attention to sample location in larger or unevenly sectioned parts. A test taken near a chilled surface may tell a different story from one taken in a thicker interior section. We agree where to inspect before comparing treated and untreated castings.
Electrical and electronic products
For electrical enclosures and electronic equipment housings, we start with dimensional, structural, and finishing requirements. If electrical conductivity is a controlled property, we include it in the evaluation. We do not assume that a material used successfully in one housing is automatically suitable for a conductor application.
Foundries processing mixed orders
For general foundries, we discuss how often alloys change and how materials are identified between jobs. We may need separate approved instructions for different alloy families. A single warehouse item should not lead to a single untested dosage across every furnace.
Across these applications, we take the same approach: define the casting requirement, check alloy compatibility, and verify the result under your conditions. The useful question is whether the treatment solves a documented production need at an acceptable cost.
How We Plan a Useful Casting Trial
We prefer a small, well-recorded comparison before routine use. It gives your production, quality, and purchasing teams the same evidence to review. We can discuss the following trial structure with your technical team, then adapt it to the selected product's instructions and your plant procedures.
Establish the baseline
We begin with an untreated reference or your current approved treatment. We record the alloy chemistry, melt mass, temperature, return-metal proportion, and normal treatment sequence. We also identify the defect or property being assessed. “Better casting” is too broad to serve as a test result.
Set the variables before pouring
We agree the candidate material, weighed quantity, addition point, mixing practice, and sampling schedule. We keep other conditions as consistent as practical. If the temperature, degassing cycle, and mold conditions all change at once, we cannot confidently assign the result to the grain refiner.
We do not publish one universal addition temperature or contact time for this product name. Those instructions depend on the confirmed formulation, physical form, alloy, and equipment. We would agree them from the applicable technical information and the trial plan.
Check timing as well as the first result
We include a later sample when your process involves extended holding or several ladles. An early sample cannot establish performance through an entire production run. We want to know whether the selected treatment remains effective over the time that matters to your operators.
We also record stirring and transfer events. These are part of the process history, even when they seem routine. If results differ between the beginning and end of a run, that record helps your team investigate without immediately changing the addition quantity.
Measure the result consistently
We agree a grain assessment method, sample position, preparation procedure, and reporting format. We compare like with like. Where mechanical properties are part of the target, we keep specimen geometry, casting location, and heat treatment comparable as well.
We review casting defects separately from grain size. A finer structure is useful evidence, but a leakage failure or a shrinkage cavity still needs its own investigation. We avoid treating one favorable micrograph as proof that every production concern has been resolved.
Turn a successful trial into a clear instruction
Once your team accepts the results, we help define the purchasing and application information needed for repeat orders. That may include material identification, approved addition conditions, inspection points, and the action to take when results fall outside the agreed range.
We also encourage a simple cost review. We compare additive consumption per tonne with the relevant quality result, inspection effort, and handling time. This gives purchasing a more useful basis for comparison than the pack price alone.
Why Work with Huaao on Selection and Supply?
We are Jianli Huaao Technology Co., Ltd., a technology-oriented enterprise combining chemical additive research, production, sales, and technical consulting. We have worked in aluminum profile surface treatment for more than two decades. That background gives us a practical understanding of how material choices affect later production steps.
We are located in the Huazhong Ecological Aluminum Demonstration Industrial Park in Jianli, Hubei, China. We also serve as a standing council member of the China Non-Ferrous Metals Processing Industry Association. We support our work with production facilities, precision testing instruments, and a quality assurance system.
Our wider product experience includes aluminum pretreatment, polishing, etching, electrolytic coloring, sealing, degreasing, and chromium-free passivation additives. For casting additives, we keep the discussion tied to the specific product and application. Our experience in surface treatment does not replace the need to verify a grain refiner in your melt.
We confirm the technical indicators, order quantity, and packaging standard in the contract. We can provide documents such as a COA and SDS as required, with the document scope agreed for the selected product. If your approval process needs additional testing or paperwork, please include it in the inquiry.
We confirm production and preparation lead times according to product type, stock position, and order volume. We can discuss T/T or letter-of-credit payment terms. We do not promise an unverified dispatch date before checking the actual order requirements.
We select packaging and transport around the material's properties and destination. Suitable arrangements may include bags or drums, with shipment by sea, road, or eligible air freight. Where dangerous-goods rules apply, packaging and transport must meet the relevant requirements.
To request a titanium boron thinning additive quotation, send us your alloy grade, casting method, melt quantity, intended application, expected order volume, and destination. If you have a current product specification, include that too. We can then discuss a concrete supply requirement instead of quoting against a name with several possible interpretations.
Questions We Commonly Address Before an Order
Is titanium boron thinning additive the same as a grain refiner?
We use the name on this page for a titanium-and-boron-based aluminum grain refining additive. Because “thinning” can be ambiguous, we confirm the intended function and exact material in the quotation. We recommend using the agreed technical designation on purchase orders.
Do you automatically supply AlTi5B1?
We do not establish the supplied composition from the general product name. AlTi5B1 is an industry reference discussed here, not a confirmed Huaao stock specification. We confirm the selected composition, form, technical limits, and availability before accepting an order.
How much should we add to one tonne of aluminum?
We determine that from the confirmed material, initial melt chemistry, target result, and trial conditions. Table 2 explains elemental input only. We would not treat its illustrative quantities as instructions for a production furnace.
Can we use it with recycled aluminum?
We can discuss that application after reviewing the actual chemistry and return-metal practice. Recycled content alone does not decide suitability. We need to understand variation between heats and check how the treatment performs across the material range you expect to process.
Will it improve molten aluminum fluidity?
We do not promise improved flow from this product name. Our stated purpose is grain refinement. If mold filling is your main problem, we would first discuss the alloy, temperature, mold, and filling conditions so the trial addresses the right issue.
Can it replace degassing or silicon modification?
We treat those as separate functions. We would retain the treatments your process needs and review how they fit together. Any change to the treatment sequence should follow a controlled evaluation using the actual materials involved.
Can you guarantee a strength increase or lower reject rate?
We can discuss agreed acceptance targets and how to test them. We do not assign a universal improvement percentage without comparable application data. Your final result also depends on alloy control, casting conditions, heat treatment, and the cause of existing defects.
How should we store and handle the material?
We provide or agree the applicable product information for the selected formulation. Follow its SDS, packaging instructions, and your plant's approved molten-metal procedures. Storage conditions, handling equipment, and transport classification must be based on the actual supplied material.
What should we send with an inquiry?
We can work more efficiently with an alloy designation, recent analysis, casting route, normal holding time, and a clear quality target. Add your quantity, destination, packaging preference, and documentation needs so we can address technical selection and delivery together.
Discuss your aluminum casting requirements with Huaao. We will help clarify the titanium boron thinning additive specification, the evaluation conditions, and the supply terms needed for your next step.

WhatsApp
Phone
E-mail
Message