Login | Register
产品中心
Home > Products > Basic chemical raw material series > Nickel acetate

Nickel acetate

<span style="font-size: 16px;"><a href='https://www.huaaochemtech.com/tag/nickel-acetate' target='_blank' class='key-tag'><font><strong>Nickel Acetate</strong></font></a> for Anodizing and Industrial Use | Huaao</span>

We help chemical buyers connect a nickel acetate specification with the process that will use it. For an anodizing plant, that means understanding the sealing formulation and finished-surface requirements. For a catalyst or chemical manufacturer, the priorities may be nickel content and specific impurities. At Jianli Huaao Technology Co., Ltd., we bring those details into the enquiry before discussing the supply arrangement.

We develop and manufacture chemical additives for aluminum profile surface treatment, alongside the trading of electroplating and magnetic raw materials. Nickel acetate enquiries are reviewed through our raw material business. We confirm the proposed chemical form, grade, available documents, and commercial conditions against your intended application.

Nickel acetate usually refers to nickel(II) acetate, also known as nickel diacetate or nickelous acetate. Buyers may specify Anhydrous Nickel Acetate or Nickel Acetate Tetrahydrate. The tetrahydrate has four water molecules in its formula. This changes its formula mass and the proportion of nickel in the material, so we identify the form explicitly in the purchasing description.

Reference information describes the tetrahydrate as a green crystalline material, supplied in forms such as crystals or crystalline powder. We check the offered physical form against the specification. Color and appearance can help with receiving inspection, while analytical information is needed to assess chemical composition and acceptance limits.

Nickel acetate forms: reference identity comparison
Reference itemAnhydrous nickel(II) acetateNickel(II) acetate tetrahydrate
CAS number373-02-46018-89-9
FormulaNi(CH3COO)2Ni(CH3COO)2·4H2O
Approximate formula mass176.78 g/mol248.84 g/mol
Water molecules in the ideal formula04
Acetate groups per nickel atom22

Sources: PubChem, Nickel Acetate, CID 9756, for the anhydrous identity and formula mass; U.S. EPA Substance Registry Services, Nickel diacetate tetrahydrate, record 524672078, for the tetrahydrate identity and formula mass. Water counts and acetate-group ratios follow the formulas. These reference data identify chemical forms; the quotation and agreed specification define the proposed supply.

We recommend sending the complete product name, CAS number, and current acceptance specification with your enquiry. That gives both teams a clear starting point and helps prevent a comparison between materials that share a common name but have different purchasing requirements.

From Dissolved Nickel to a Sealed Aluminum Surface

We discuss nickel acetate for aluminum anodizing mainly as a raw material for sealing formulations. Anodizing produces an oxide layer with pores. Sealing changes the accessibility of that porous structure and helps the finished coating meet the required service conditions. The result depends on the oxide layer, the sealing chemistry, and the way the complete line is operated.

What happens during nickel acetate sealing?

In established nickel acetate sealing systems, changes to the hydrated aluminum oxide and the formation of nickel-containing deposits can contribute to pore closure. Published studies have observed pore filling and deposits at the outer surface after hot nickel acetate sealing. We use that background to explain the material's role, while your approved process defines how it is used.

The practical question is whether the finished aluminum meets the agreed requirements. A raw material's formula cannot establish the sealing result on its own. We ask about the alloy, coating thickness, coloring stage, rinsing, sealing sequence, and test method so the proposed material can be assessed in the context of the actual finish.

A raw material and a finished sealing product serve different needs

If your team prepares its own sealing formulation, nickel acetate may be one ingredient among several. The other components and their approved limits help determine the system's behavior. Tell us the raw material specification that your formulation requires so we can review the proposed grade against a defined input requirement.

If your line uses a finished sealing agent, tell us that instead. We also develop surface treatment additives, including sealing agents for different operating temperature ranges. A finished formulation needs its own technical instructions and evaluation. We identify which product type your team needs before discussing a suitable proposal.

Why the temperature range belongs to the complete system

Nickel acetate appears in both conventional hot sealing work and research on formulations operated under other conditions. Additional ingredients can change the process. We therefore ask for the approved formulation and operating range rather than assigning a universal temperature, concentration, or treatment time to the raw salt.

For a colored finish, we also ask how your team checks shade, visible deposits, and staining after treatment. Those appearance checks should sit alongside the applicable sealing-quality assessment. We want the evaluation to show how the material performs on the actual coating and part, under the conditions used for production.

Technical references: Hu and coauthors, “Effect of sealing on the morphology of anodized aluminum oxide,” Corrosion Science, 2015; “Low Temperature Sealing of Anodized Aluminum Alloy for Enhancing Corrosion Resistance,” Materials, 2020. These studies concern defined experimental systems and do not establish a universal operating recipe or a performance guarantee for a supplied raw material.

Choosing a Grade: Nickel Content, Crystal Water, and Value

We start grade comparisons by checking what each percentage represents. Compound assay measures one aspect of the stated chemical product. Elemental nickel content measures the fraction of mass contributed by nickel. Water-related results need their own definition and method. Keeping those measurements clear makes the quotation easier to evaluate.

For nickel acetate tetrahydrate, water of crystallization belongs to the ideal formula. It contributes to the material's mass. As a result, pure tetrahydrate contains a smaller nickel percentage than pure anhydrous nickel acetate. That difference alone says nothing about the level of unwanted impurities in either offered material.

Calculated mass comparison of ideal pure nickel acetate forms
Comparison basisPure anhydrous formPure tetrahydrate form
Theoretical nickel content33.20% by mass23.59% by mass
Nickel in 100 kg of pure compoundApproximately 33.20 kgApproximately 23.59 kg
Theoretical crystal-water fraction0.00%28.96% by mass
Pure compound containing 1 kg of nickelApproximately 3.012 kgApproximately 4.240 kg

Calculation sources: PubChem CID 9756 and EPA Substance Registry Services record 524672078 give formula masses of 176.78 and 248.84 g/mol. CIAAW, Atomic Weight of Nickel, gives 58.6934. Nickel percentage equals nickel atomic weight divided by formula mass, multiplied by 100. The crystal-water fraction uses the difference between the displayed formula masses. Values are rounded theoretical calculations, not Huaao assay limits, lot results, or formulation instructions.

We return to the actual specification for a commercial decision. Confirm whether the result is reported on the material as received, on a defined dry basis, or as an assay calculated from another measurement. Your receiving laboratory and the proposed supply documents should use reporting bases that can be compared properly.

Looking beyond the price per kilogram

Nickel content can help your purchasing team understand a price comparison, especially when two offers describe different hydrate forms. It is one part of the review. We also consider impurity requirements, packaging, freight, preparation behavior, and the testing needed to approve the material for your process.

A change of form should pass your technical evaluation before purchasing is finalized. Equal amounts of nickel do not establish equal preparation behavior or a completely equivalent formulation. We discuss the required form and accepted specification together so the commercial comparison stays connected to the production requirement.

When you request high purity nickel acetate, please include the limits behind that description. The impurity that matters most to your application may not be captured by a broad grade name. We review the requested analytical conditions and confirm the information available for the proposed supply.

For example, an offer stating a compound assay near 98% and another listing nickel content near 23.6% may be describing different measurements of the same general hydrate form. We first ask for the calculation basis and the accompanying limits. Comparing the two percentages directly would hide the information your team actually needs to judge the proposed materials. The accepted specification should make that distinction easy to read.

Applications We Review Before Proposing a Material

We focus on the function nickel acetate performs in your operation. An anodizing customer may need a defined ingredient for sealing chemistry. A chemical manufacturer may use it as a nickel source for further processing. The same product name can therefore lead to different acceptance priorities and qualification methods.

Aluminum profiles and finished anodized parts

For aluminum profile finishing, tell us the coating type, final appearance requirement, and sealing system already approved. We discuss the raw material in relation to those requirements. Architectural profiles, decorative components, and general industrial parts may be assessed under different customer agreements, so the intended use belongs in the enquiry.

If you are investigating a change in appearance or sealing quality, send the process record and the accepted material specification. A useful comparison includes the earlier treatment stages and the test used for release. We can then identify what evidence about the proposed raw material is relevant to the investigation.

Catalyst preparation and chemical synthesis

Nickel acetate has published catalyst and catalyst-intermediate uses. We ask which reaction system or downstream preparation route your approved specification supports. Nickel content, water, and particular impurities may all matter. Your technical team should evaluate the finished catalyst or reaction performance through its established qualification procedure.

For other nickel compound preparation, include the requirements of the next processing stage. The acetate form introduces different accompanying chemistry from sulfate, chloride, or carbonate materials. We review the requested identity and limits so a proposed offer can be assessed against the actual input specification.

Selected plating and textile processes

Published product information also lists nickel acetate tetrahydrate for electroplating and as a mordant in textile dyeing. These are process-specific uses. We ask buyers to identify the approved formulation and acceptance standard before discussing suitability. A broad industry label cannot replace the requirements of a particular bath or dyeing method.

Application references: published nickel acetate producer information identifying anodized aluminum sealing and catalyst uses; published nickel acetate tetrahydrate technical information listing electroplating, textile mordant, and nickel compound preparation applications. Suitability of the offered grade remains subject to the customer's specification and process evaluation.

Quality Checks That Make Repeat Orders Easier

We prefer an acceptance specification that both purchasing and the receiving laboratory can use. Start with the product identity, required assay or nickel content, reporting basis, and important impurities. Add the physical form, test methods, and documents needed for release. These details give the proposed supply a clear target.

Turn general quality requests into measurable limits

If your process controls iron, copper, cobalt, chloride, sulfate, insoluble matter, or another characteristic, state the actual limit and unit. We review what information is available for the proposed grade. Where your laboratory needs a particular detection capability, include that requirement so the analytical evidence can be assessed properly.

We also ask how you evaluate solution preparation. Nickel acetate tetrahydrate is water soluble, but your formulation may have its own preparation conditions and residue limits. If preparation time or solution appearance matters, define the method used for acceptance. That gives both teams something specific to compare during an evaluation.

Keep units consistent when reviewing impurity results. On a mass basis, 20 mg/kg equals 20 ppm, or 0.002%. Those are three ways of expressing the same example concentration, not proposed impurity limits for this product. We also check whether a result is a measured value or is reported below a stated analytical threshold. Clear units and reporting conventions make a supplier comparison easier to interpret.

Connect documents with the material being received

The specification defines the acceptance requirements. A certificate of analysis provides relevant information for a lot, while the safety data sheet addresses hazards and handling. We discuss all three during order review. Your supplier approval procedure may also request origin information, analytical methods, or other supporting records.

If you need additional testing, we confirm feasibility, method, cost, and timing before accepting it as a delivery condition. We distinguish preliminary information used for evaluation from the documents agreed for the actual shipment. Clear lot identification helps your receiving team connect the report, label, and delivered material.

Evaluate the raw material and the finished coating

For anodizing applications, incoming chemical checks and finished coating checks answer different questions. A conforming raw material still needs evaluation within the approved sealing system. We ask which finished-surface tests apply and how the trial will be compared with your accepted reference material or process.

Recognized sealing assessments include dye absorption, electrical admittance, and mass loss under specified test conditions. Each method has a defined scope and limitations. We ask your team to select the method and acceptance criteria that apply to the coating, customer agreement, and sealing system being evaluated.

Where a sample is required, we confirm availability and terms. Record the sample identity, specification revision, preparation conditions, process measurements, and test timing. Keep those records with the approval decision. They provide a useful reference when your team reviews a repeat order or investigates a later discrepancy.

For a supplier change, we suggest agreeing on how many trial results your organization needs before approval. One successful laboratory preparation may answer a different question from a production run using the established equipment and water supply. Your qualification plan should define the evidence needed at each stage. We review the raw material and document requirements against that plan, while your technical team controls the process acceptance decision.

Technical references: published nickel acetate tetrahydrate solubility information; ISO 2143:2017, dye-spot assessment; ISO 2931:2017, admittance measurement; ISO 3210:2025, mass-loss assessment. Use the applicable complete method to establish scope, conditions, and interpretation. The references do not establish a universal pass limit or product certification.

Why We Consider the Whole Surface Treatment Line

We have worked in aluminum profile surface treatment for more than two decades. Our company is located in the Huazhong Ecological Aluminum Demonstration Industrial Park in Jianli, Hubei. We combine scientific research, technical consulting, production, and sales in our additive business, alongside raw material trading.

Our development work covers dozens of pretreatment and finishing series. These include aluminum alloy chemical sandblasting agents, polishing agents, long-life alkaline etching agents, neutralization brightening agents, electrolytic coloring stabilizers, sealing agents, degreasing and dewaxing agents, and chromium-free passivation agents. Working across those stages helps us understand why a chemical enquiry often involves more than one tank.

For a nickel acetate discussion, that background helps us ask relevant questions about rinsing, coloring, sealing, and receiving requirements. If a surface issue appears after sealing, the records from earlier stages can be important. We bring the wider process into the conversation so the raw material review addresses the actual production concern.

We have production facilities, precision testing instruments, and a quality assurance system for our established chemical business. We also serve as a standing council member of the China Non-Ferrous Metals Processing Industry Association. For the proposed nickel acetate supply, we review the grade and available product-specific documents against your requirements.

Keep the producer and supply information clear

Our manufacturing expertise centers on Aluminum surface treatment additives. We confirm the proposed nickel acetate material and available origin or producer information through the raw material supply arrangement. If your approval procedure requests production information or particular quality records, raise those needs early so we can confirm what can be provided.

We also review the commercial details alongside the technical ones. Your laboratory needs a defined material; purchasing needs an agreed quantity, package, price basis, and schedule. We aim to make the proposal clear enough for both teams to assess the same supply conditions.

Packaging, Shipment, and Payment for Your Order

We confirm packaging against the actual material form, quantity, destination, and handling system. For solid nickel acetate, suitable options may include sealed inner packaging with an appropriate bag or drum arrangement. Package availability, net weight, labeling, and pallet details are confirmed for the proposed order.

Tell us how your site opens and charges the material. Batch size, manual lifting limits, dispensing equipment, and the handling of part-used packages can affect the practical choice. We review those needs before settling the package arrangement and shipment preparation requirements.

Include safety information in the purchasing review

Nickel acetate requires appropriate controls for worker exposure and environmental releases. Published safety information identifies serious hazards, including skin and respiratory sensitization, cancer risks, and aquatic toxicity. We ask buyers to review the current SDS for the offered material and establish controls through their workplace assessment.

That assessment should cover dust control, protective equipment, storage compatibility, spills, and waste. Water solubility does not make discharge to drains acceptable. Your site's procedures and applicable requirements govern handling and disposal. We confirm relevant safety and shipment documents during the enquiry.

Separate material preparation from transit time

Lead time depends on chemical form, grade, availability, order quantity, testing, packaging, and document requirements. We confirm the schedule after reviewing those details. Please state whether your target means dispatch, arrival, or readiness for production after receiving inspection, because each date has a different planning role.

Sea, road, or air transport can be reviewed where permitted and accepted by an appropriate carrier. The specific material, shipment classification, package, quantity, and destination determine the arrangement. We confirm the applicable transport information and shipping responsibilities for the order rather than assigning one route to every enquiry.

Agree on payment and delivery acceptance

We can discuss T/T or a letter of credit, with the final terms set out in the contract. Currency, payment timing, banking conditions, required documents, and shipping responsibilities should be clear before order acceptance. Raise any special bank wording or document requirement early enough for review.

Delivery acceptance should cover the agreed quality indicators, quantity, package identity, and supporting documents. Tell us about your inspection period and any receiving tests before shipment. On arrival, compare the material and paperwork with the accepted order and report discrepancies through the agreed procedure before release for use.

Safety background: published nickel acetate tetrahydrate safety information and PubChem nickel acetate hazard records. The current SDS for the offered form, applicable workplace requirements, and actual shipment documents govern the specific supply.

Nickel Acetate Questions We Settle Before Purchasing

Which nickel acetate form should we specify?

We ask you to identify the form required by your approved process. Include the full product name, CAS number, and acceptance specification. Anhydrous nickel acetate and the tetrahydrate have different formula masses, so we review the form before discussing assay limits, quantity, and the proposed quotation.

What do CAS 373-02-4 and 6018-89-9 identify?

CAS 373-02-4 identifies anhydrous nickel(II) acetate. CAS 6018-89-9 identifies nickel(II) acetate tetrahydrate. We check the name, formula, and identifier together so the proposed offer and supporting documents refer to the material your team intends to evaluate and purchase.

Does 23.59% nickel mean the tetrahydrate is low purity?

No. We distinguish elemental nickel content from compound purity. Pure nickel acetate tetrahydrate theoretically contains about 23.59% nickel by mass; acetate groups and crystal water account for the remaining formula mass. The offered material must meet its agreed assay, reporting basis, and other acceptance limits.

Can we use nickel acetate directly as a sealing agent?

We review the complete process requirement. Nickel acetate is a raw material used in sealing chemistry, while an approved commercial sealing formulation may contain additional ingredients. Tell us whether you need the raw salt or a finished sealing product so we can discuss the appropriate enquiry.

Can we replace Nickel Fluoride with nickel acetate?

We treat that as a formulation and process change. The salts introduce different accompanying components, and a sealing system may depend on other ingredients and operating conditions. Your technical team should evaluate the complete change against the approved process and finished coating requirements before adopting it.

Is the tetrahydrate suitable for a water-based preparation?

Nickel acetate tetrahydrate is water soluble. We still ask you to define the preparation conditions and any residue or solution-appearance limits needed for your formulation. Those checks help establish whether the proposed grade works within the actual process rather than relying on solubility alone.

Can you quote a high-purity grade?

Send the analytical limits and reporting methods behind that request. We review availability against the actual specification, including important impurities and document needs. The proposed offer defines what is available and which requirements need further confirmation before the order can be accepted.

What determines packaging and delivery time?

We confirm these after reviewing the chemical form, grade, quantity, available supply, testing, package requirements, and destination. Include your target use date and receiving restrictions. We can then review a concrete proposal with the relevant preparation and shipment conditions stated for your assessment.

How do we request a nickel acetate quotation?

Send the required form, specification, application, quantity, destination, and target date. Add preferred packaging, COA and SDS requirements, and any sample or additional testing needs. We will review that information and confirm the proposed material and commercial terms before order acceptance.

Discuss your nickel acetate requirement with Huaao. Share your current specification or the questions your team needs to resolve. We will use those details to review product identity, quality requirements, supporting documents, packaging, payment, and delivery conditions for the proposed supply.

ONLINE MESSAGE

Please fill in a valid email address
Captcha Can not be empty

RELATED PRODUCTS

No search results found!
chat

Online Customer Service

×

This website uses cookies to ensure you get the best experience on our website.

Accept Reject